Pics & Vids of Nissan Z with aftermarket wheels

[Greenblurr93]

Amazing. Props on the wheels they look great. Obviously you are lowered as well. About an inch?

on swift springs, yes.

 

[JRM2k5]

Amazing. Props on the wheels they look great. Obviously you are lowered as well. About an inch?

Looks like a 10mm spacer would be about perfect out back

 

[Greenblurr93]

Looks like a 10mm spacer would be about perfect out back

10mm would poke, its about 2-3mm from flush

 

[citrus]

Im new here and just joined to see if anyone has the wheel specs on this car. Been searching and searching and these are the only wheels I have seen that I even somewhat like. I know they are Advans but the width and offset Im not sure.

This is a demo car from Runduce. The wheel/tire combo is RZ-DF2 19x10.5+15 on 275/35/19 with 3.5 degrees camber front and rear.

Thank you for asking about this car. I didn't pay too much attention to it before because I didn't care too much for the wheel design, but I've been looking for square setup measurements, and this is a good example.

 

[ForSale24]

Tires are 305/30R19 and 275/35R19

Could I run a 265/40/19 in the front? Or should I really find a 35?

 

[D2M]

Yes 265/40/19 will be too tall. Even the stock front Nismo 255/40/19 is too tall imo. Try to stay around 27" tall or smaller.

 

[Hernandooo]

265/40/19 is pretty good IMHO. I mean coming from a area where potholes are everywhere, the 40s (I feel like) have prevented my rims from being wrecked. Keep in mind the air pressure and what not...

 

[speedjuno]

These aren't fancy nor expensive, but I'm a silver wheel kinda guy, old school, and I like that they match the silver roofline.

 

[dogunbound]

2024 Performance (So with the quad piston front brakes)

No fender rolling required.

Work Emotion ZR10
Front: 19x9.5 23ET
Rear: 19x10.5 15ET

Rear sticks out a smidge

Front is perfect:

 

[Hernandooo]

2024 Performance (So with the quad piston front brakes)

No fender rolling required.

Work Emotion ZR10
Front: 19x9.5 23ET
Rear: 19x10.5 15ET

Rear sticks out a smidge

Front is perfect:

Drop it a few CM and add some camber, the wheel poke will be gone

Frig, I wish I had my wheels here ?

 

[Imperial]

gramLIGHTS 57Transcend

19X9.5 +25
19X11 +18

NT555 G2

275/35R19
315/30R19

 

[D2M]

gramLIGHTS 57Transcend

19X9.5 +25
19X11 +18

NT555 G2

275/35R19
315/30R19

The front looks high, check your front springs to see if they left the shipping spacers in..

 

[Imperial]

They're out. Learned my lesson about those from my 370Z Nismo. It's from the angle and focus of the photograph.

 

[Landon]

19x10 ET27 (23.9lbs)
275/35 PS4s
19x11 ET25 (24.4lbs)
315/30 PS4s

Variant Aure
Maricopa Copper w/ Frosted clear

Is the ET27 and ET25 are offsets for the front and back?

I am wondering if the Z can handle something like this:

Front: 20x10
Back: 20x12

I don't know what the offsets would be for the front and back??? If the 20x12 is too large for the back, I might go with what you got.

 

[Hernandooo]

Is the ET27 and ET25 are offsets for the front and back?

I am wondering if the Z can handle something like this:

Front: 20x10
Back: 20x12

I don't know what the offsets would be for the front and back??? If the 20x12 is too large for the back, I might go with what you got.

20 inch in general might not suit the Z. I mean it may look good, but are you willing to sacrifice comfort/function over style.

20x12 maybe push it as well, unless you have a almost zero offset, and wide body kit, with your fenders cut, it could work

The max I've seen/heard/recommend is 19 with max 10.5 for the front and 11 for the rears. Offset at around +10to13

EDIT
Maybe this video may help make your decision