Nismo Z prototype spied testing in the U.S.

[MCN1SMO]

These look to be the same tire off my GTR. Mine are runflats. Are they really putting runflats on the Z or does Dunlop make a non runflat version? mine are DSST CTT the spy pics arnt so I assume that is the difference

 

[Ziggy]

I think it’s the same just taped differently. The lines and the bevel of the upper part seem to be the same to my eyes.

Car is looking great! And on the day Porsche priced me out of their cars with the $10k increase on the base 911. The 718 has gone up like $8k in 2 years. Combined with the lotus $12k price increase on the Emira.

Sorry, Nissan, for talking shit on your pricing. Won’t happen again. Lol I’m ready for the Nismo!

 

[MCN1SMO]

I think it’s the same just taped differently. The lines and the bevel of the upper part seem to be the same to my eyes.

Car is looking great! And on the day Porsche priced me out of their cars with the $10k increase on the base 911. The 718 has gone up like $8k in 2 years. Combined with the lotus $12k price increase on the Emira.

Sorry, Nissan, for talking shit on your pricing. Won’t happen again. Lol I’m ready for the Nismo!

thats a pretty convincing argument as if you look at the black tarp car from December it appears to have that horizontal grill split covered.

but then I see this shot that was around the same time of the black trash bag car and it again looks different that what we saw today

 

[Kbl911]

thats a pretty convincing argument as if you look at the black tarp car from December it appears to have that horizontal grill split covered.

but then I see this shot that was around the same time of the black trash bag car and it again looks different that what we saw today

That split detail looks pretty deliberately crafted - look how it's contoured and tapered - I'd say that stands a good chance of being final design language. Different taping is the likely culprit here. If I had to guess, the sides of the overall air dam slope down at an angle beginning somewhere beneath the headlamps and the cooling ducts (presumably) are integrated into the slopes toward the outer corners (making them potentially semi-triangular).

 

[MCN1SMO]

did a little research and this Z has a different Michigan manufactures plate than the other 2 test mules we have seen. so definitely a 3rd car

 

[Ziggy]

Cracking up over the photo of the guy just playing on his phone. The photos are usually of people driving the car. Is he bored sitting around waiting for a tow? Maybe he’s playing a racing game. I bet he picked the Supra.

 

[bpeckham]

I mean, the NISMO is great and all, but how about just some regular Zs!?

 

[MHockey17]

These look to be the same tire off my GTR. Mine are runflats. Are they really putting runflats on the Z or does Dunlop make a non runflat version? mine are DSST CTT the spy pics arnt so I assume that is the difference

The Dunlops on the NISMO 370Zs are runflats also, so wouldn’t be unprecedented if these are too.

Though previous gen tire sizes were different, 245 front 285 rear, and now the Performance Z runs 255 front 275 rear. Wondering if Nissan will contract new sizes from Dunlop or reuse the same exact tires from last gen?

 

[MCN1SMO]

The Dunlops on the NISMO 370Zs are runflats also, so wouldn’t be unprecedented if these are too.

Though previous gen tire sizes were different, 245 front 285 rear, and now the Performance Z runs 255 front 275 rear. Wondering if Nissan will contract new sizes from Dunlop or reuse the same exact tires from last gen?

if those wheels truly are the GTR NISMO as they appear to be they would use 255 and 285 tires

But that is assuming these are the same wheel sizes which are 20 X10 and 20X10.5

I cant tell from the pics if these are the exact 20" wheel or a 19" version of that wheel. if they are 19" they could easily be made to fit the 245/275 set up like the current performance wheel of the new nismo LMGT4


the piece of black tape is on the same place on all the wheels. that is for sure the NISMO logo being covered up. I just cant make out the sidewall well enough to see the markings on size

 

[trackratZ]

Interested in what square setup will fit in the Z without rolling or cutting. I hope 10" or 10.5" fits with proper offsets or w/o too much spacer. 19" is fine, think more tire choices in the 275 or 285 range. Non-square is always a pain since you can't rotate.

 

[RicerX]

This vehicle was said to have been testing in Chandler, Ariz., but was pulled off to the shoulder with hazards on.

Getting that Nismo-edition stop sale to go with it.

Car should be on dealer lots for Spring 2027! Get your preorders in, gang!

 

[Heavy Dupree]

Interested in what square setup will fit in the Z without rolling or cutting. I hope 10" or 10.5" fits with proper offsets or w/o too much spacer. 19" is fine, think more tire choices in the 275 or 285 range. Non-square is always a pain since you can't rotate.

Fenders come pre-rolled.

 

[Ziggy]

I wonder if there is any padding in the rear bumper camo. The lower half seems to really stick out from the flat tail lights.

 

[MHockey17]

if those wheels truly are the GTR NISMO as they appear to be they would use 255 and 285 tires

But that is assuming these are the same wheel sizes which are 20 X10 and 20X10.5

I cant tell from the pics if these are the exact 20" wheel or a 19" version of that wheel. if they are 19" they could easily be made to fit the 245/275 set up like the current performance wheel of the new nismo LMGT4


the piece of black tape is on the same place on all the wheels. that is for sure the NISMO logo being covered up. I just cant make out the sidewall well enough to see the markings on size

Ya I tried zooming in on the sidewall but I couldn’t make out the sizes either , the mystery continues lol, perhaps a photo wizard will come along n brighten/enhance these shots to make it out

That’d be pretty neat if they adapt the GTR size wheels though, prob would be inline with ensuring additional clearance for running what appears to be larger 15”+ brakes

 

[takemorepills]

Fenders come pre-rolled.

It's been that way for a while in this chassis, hasn't it? That's also how G37's are.