27 manual shift knob replacement?

[yellowz6mt]

Nissan doesn’t want it to become loose and rattle under any circumstances.

 

[jliuod]

I was thinking of replacing the stock shift knob for a while now. I was very hesitant as the horror stories I heard on the difficulty level of removing the stock knob. I saw a video of this person who removed the stock shift knob with ease. He used a fairly heavy duty strap wrench. I looked it up and it is readily available at Amazon. The brand is Value Max two piece strap wrench set that cost $19.99. Received it today. Pretty heavy duty compares to other strap wrench I had in the past. I used a microfiber towel to cover the shift knob and put this strap wrench to the test. I was surprised I was able to loosen the knob first try. Still I had to continue forcefully kept turning the knob. Eventually I removed it without drama. No damage to the stock shift knob at all. So it is possible to remove this shift knob afterall!

 

[barncobob]

very interested. Did U have to remove the console and put some type of mechanical clockwise resistance resistance on the shaft to counter the counter clockwise of the shift knob being removed.

 

[jliuod]

very interested. Did U have to remove the console and put some type of mechanical clockwise resistance resistance on the shaft to counter the counter clockwise of the shift knob being removed.

Not at all. I just put it in neutral.

 

[Mr. Mac]

Recently upgraded knob in my '24 Performance MT with no problems at all, and no damage to factory knob either. >>> https://www.nissanzclub.com/forum/threads/chonk.10915/

 

[CPerdomo]

I replaced my shifter in my 27 Nismo with the same one that Mr. Mac used. I had to use tools to remove it. It's not damaged but it's not without marks either.
I love the new shifter. The dust debris you see by the phone charger is the glue they place at the factory...

 

[barncobob]

can U tell us which tools U used,,Im on the fence on whether I want to try this or not.

 

[KyleWI]

I replaced my shifter in my 27 Nismo with the same one that Mr. Mac used. I had to use tools to remove it. It's not damaged but it's not without marks either.
I love the new shifter. The dust debris you see by the phone charger is the glue they place at the factory...

Yeah, what's up with that glue they use? It's horrible, I haven't cleaned it off yet and I'm dreading it.

 

[Schantin]

can U tell us which tools U used,,Im on the fence on whether I want to try this or not.

I added the same knob that Mr. Mac and C. Perdomo added. Unlike Mr. Mac, I sure as hell was not able to take the stock shift knob off "unscathed". I made a vid of the struggle. It might help you decide if you want to attempt this job.