Pics & Vids of Nissan Z with aftermarket wheels

[Niks_Mowing]

I put some meatier tyres on my setup and I'm pretty happy with the fitment. I thought they were hitting the guards at the back on compression but they were clipping a plastic tab that hangs off one of the bumper mounts. We trimmed it and now it's all good.

Front: 19x9.5 +23 with Advan v107 265x40
Rear: 19x10.5 +15 with Advan v107 295x35

I'd like the fronts to be a little more flush so I'll either space them or put FUCAs in to take some camber out.

V107 gang! Wheels look almost the same too haha

 

[FSUZ33]

V107 gang! Wheels look almost the same too haha

One less spoke and they’re NISMOs.

 

[Niks_Mowing]

One less spoke and they’re NISMOs.

I was looking for a used set of Nismo's before I ended up buying these. Absolutley love the look of them. These spokes are quite a bit fatter, and tuck in before the lip too.
Even the stock 19's are one of the best looking OEM wheels, it's just a shame about the width and offset.

 

[FSUZ33]

Wouldn’t surprise me if they’re cut from the same forging, idk.
I like the look of the Rays/NISMO LMRS1 or whatever they’re called, but they look so similar to my current wheels, what’s the point? Same with @Kludos wheels. Are they Gramlights?

 

[FatRatZ]

Wouldn’t surprise me if they’re cut from the same forging, idk.
I like the look of the Rays/NISMO LMRS1 or whatever they’re called, but they look so similar to my current wheels, what’s the point? Same with @Kludos wheels. Are they Gramlights?

Just mounted the LMRS1s on my heritage. 22 offset front and rear 9 1/2 in the front 10 1/2 in the rear with wider Michelin tires. 265/285. I just bought a 10 mm spacer for the rear. Lowered the car with the Nismo coil overs.

 

[FSUZ33]

Just mounted the LMRS1s on my heritage. 22 offset front and rear 9 1/2 in the front 10 1/2 in the rear with wider Michelin tires. 265/285. I just bought a 10 mm spacer for the rear. Lowered the car with the Nismo coil overs.

Really like that. I‘ve thought about it, serious scale 1-10, only about a 5, but I couldn’t decide on gunmetal or bronze.
that looks fantastic!
…and I did see orange in the dealership, and like the stealth gray, the orange looks even better in person.

 

[Kludos]

Same with @Kludos wheels. Are they Gramlights?

Work Emotion ZR10

 

[nismo95tt]

looks so gooo

I put some meatier tyres on my setup and I'm pretty happy with the fitment. I thought they were hitting the guards at the back on compression but they were clipping a plastic tab that hangs off one of the bumper mounts. We trimmed it and now it's all good.

Front: 19x9.5 +23 with Advan v107 265x40
Rear: 19x10.5 +15 with Advan v107 295x35

I'd like the fronts to be a little more flush so I'll either space them or put FUCAs in to take some camber out.

looks so good. Fit looks perfect in pics...

 

[2Cool]

I am officially repping the reppiest reps... a set of Circuit Performance CFS1 in matte bronze. 19x9.5 28mm fronts, 19x11 40mm (left on my 20mm spacers for these) on the back. 255/40 front and 285/35 rear Kumho Sport S tires. I have my own tire machines in my shop, and everything mounted up well, no obvious wobbles or bounce on tires or rims, no more than 1.5 ounces on each wheel for balance. High speed runs are smooth as butter, and the summer performance tires grab way better off the line than the OEM bricks.

 

[keonigt]

I was thinking of getting 18 inch wheels for my Nissan z nismo. Specifically, TE37’s in 18x9.5 +22 in the front and 18x10.5 +12 in the rear.

Any idea if 18’s would clear the Nismo’s bigger brakes?

 

[RAMCTFOLEY]

Hello everyone.
I Just picked up some aftermarket wheels and was wondering what people were doing for tpms? Is there any good aftermarket ones or should I just take the hit and go oem? I don't want to remove the ones off my stock wheels. Thanks for the help!

 

[takemorepills]

Hello everyone.
I Just picked up some aftermarket wheels and was wondering what people were doing for tpms? Is there any good aftermarket ones or should I just take the hit and go oem? I don't want to remove the ones off my stock wheels. Thanks for the help!

I used TPMS from Discount Tire on the second set of wheels for my Q60. Never had any problems.

Cheaper than OEM, but not as cheap as random online sensors, and covered by Discount Tire if they failed. Otherwise, I'd stick with OEM.

 

[keonigt]

You're right about the new(RZ34) Nismo wheel weight! I weighed mine before selling them and buying real lightweight forged Apex VS5RS wheels was the move for me. The wheels was pretty but I hate black wheels with a passion and I had heavy ass spacers on mine that added 8lbs extra in total to the 24.5/25 lb oem wheels.

VS5RS
19x9.5 (19.5 lbs)
19x10.5 (20.5lbs)

Looks great! Any problems with brake clearance and the apex wheels?

What offset is the front and rear?

 

[Nis Mo Z]

Looks great! Any problems with brake clearance and the apex wheels?

What offset is the front and rear?

Looks great! Any problems with brake clearance and the apex wheels?

What offset is the front and rear?

It actually has way more brake clearance than the standard 19’s

I think the front offset is +18 and the rear +15 offset.

 

[keonigt]

It actually has way more brake clearance than the standard 19’s

I think the front offset is +18 and the rear +15 offset.

Thanks! I love the fitment.

What tire sizes did you end up going? and what are you lowered on? any rubbing?