What did you do with your Z today? 🙋🏻‍♂️

[Nis Mo Z]

Thinking about that stillen comp cbe myself. Your pics look like the tips stick out further than the oe nismo cbe (a good thing). Might just be sold on it now.
I’m sure I’ve read your wheel/tire specs before but would you mind sharing size/offsets etc again? Looks great. .

Apex VS5RS 19x9.5/10.5, Offset 18/15, stock Nismo Dunlop 255/285

 

[FL 4Motion]

Apex VS5RS 19x9.5/10.5, Offset 18/15, stock Nismo Dunlop 255/285

Thanks!

 

[Exquisite_Red]

This is making me wonder if the “Z” caps will actually fit my LM-RS6 wheels?! I had just assumed that the Nismo wheels would have a different center cap diameter. Then I can sell my SUPER RARE Nismo centercaps on the black market, lol.

The Z centercaps fit the LM-RS6 after all! Put them on this morning.

Before/after, I think the flat centercap profile suits the shape of these wheels better:

 

[Nis Mo Z]

So yesterday I finally tested out the CZP heat exchanger because I wanted to see if it makes a big difference on a 95 degree, very humid Georgia day. I was impressed!!! The car pulled hard every chance I got despite open(hot air) intakes by B6A, Stillen Comp exhaust and running my Stillen Tru Control on Map 4(+2 psi additional). I did this for a 45 minute drive one way and the same back to my house. But prior to the Heat Exchanger install most times I felt some bad sluggish vibes when our temps got over 85 degrees with crazy humidity here.

I HAVE NO REGRETS!!!

 

[Tranzor Z]

So yesterday I finally tested out the CZP heat exchanger because I wanted to see if it makes a big difference on a 95 degree, very humid Georgia day. I was impressed!!! The car pulled hard every chance I got despite open(hot air) intakes by B6A, Stillen Comp exhaust and running my Stillen Tru Control on Map 4(+2 psi additional). I did this for a 45 minute drive one way and the same back to my house. But prior to the Heat Exchanger install most times I felt some bad sluggish vibes when our temps got over 85 degrees with crazy humidity here.

I HAVE NO REGRETS!!!

Why would you run map 4? I've been maxed out since break in. Almost 20 psi.

 

[Wangan_Z]

Work commitments have kept me from doing anything to my Z other than commuting back and fourth to work. I found these laser cut acrylic license plate frames on Etsy (CsAutoUSA) that doesn't block the State and County names. The seller calls it the low profile style as the text tab doesn't drop below the frame. I used one of their standard fonts for the "Twin Turbo" script, but I'm sure I can get one made with the correct font. I didn't want to give up my Fairlady Z badge real estate on the spoiler.

I also ordered a few MY27 front emblems from Nengun Performance in Japan. I'm hoping to have them by the end of the month.

 

[Nis Mo Z]

Why would you run map 4? I've been maxed out since break in. Almost 20 psi.

Wait you run Map 7 in Texas summer temps? Don you not feel it being sluggish? I tried Map 7 prior to the HX upgrade and it felt like some aggressive timing drops kicked in. Temps were over 90 degrees with thick humidity.

 

[KrackaC8]

Wait you run Map 7 in Texas summer temps? Don you not feel it being sluggish? I tried Map 7 prior to the HX upgrade and it felt like some aggressive timing drops kicked in. Temps were over 90 degrees with thick humidity.

He's in Houston, FWIW.

 

[Tranzor Z]

Wait you run Map 7 in Texas summer temps? Don you not feel it being sluggish? I tried Map 7 prior to the HX upgrade and it felt like some aggressive timing drops kicked in. Temps were over 90 degrees with thick humidity.

I've been on map 7 since 1200 miles. I have your exhaust and LDPS. Currently at 9100 miles. This car is stupid fast and down right dangerous with stock tires. I have no issues at all in texas temperatures. Sure it would be nice to have 60 degree temps but I don't have that option. Go fast or go home.

 

[Ikazuchi6]

Delivery 5/4 SMH

This tire shipped on 6/29, I've obviously got the replacement already. So now what.

 

[KrackaC8]

Delivery 5/4 SMH

This tire shipped on 6/29, I've obviously got the replacement already. So now what.

Now you have a spare for the attic in case you get a puncture.

 

[Bumflik]

So yesterday I finally tested out the CZP heat exchanger because I wanted to see if it makes a big difference on a 95 degree, very humid Georgia day. I was impressed!!! The car pulled hard every chance I got despite open(hot air) intakes by B6A, Stillen Comp exhaust and running my Stillen Tru Control on Map 4(+2 psi additional). I did this for a 45 minute drive one way and the same back to my house. But prior to the Heat Exchanger install most times I felt some bad sluggish vibes when our temps got over 85 degrees with crazy humidity here.

I HAVE NO REGRETS!!!

Heat Xchgr is the most important mod after tires for health and function. We have had the hottest July ever in North America.

 

[alutwon]

found a chip on my hood. woohoo

 

[KrackaC8]

found a chip on my hood. woohoo

Time for Dr. ColorChip!!!

 

[ewlbz]

Installed Katana delete.