OptionZero
Well-Known Member
nah i'm gonna keep pointing out the stupid shit that goes on hereAnd yet you continue to troll.
seriously wonder why people here even bought a Z
nah i'm gonna keep pointing out the stupid shit that goes on hereAnd yet you continue to troll.
LOL Because I couldn’t talk myself into a FF5 Daytona yet.nah i'm gonna keep pointing out the stupid shit that goes on here
seriously wonder why people here even bought a Z
See that's why there is a forum. It can provide insight and sometimes entertainment. Now from what I have seen you're not much of either. So why don't you try and serve some sort of purpose and answer the question that was posed in the post you quoted?DId you throw almost $10K in parts at your car to run the absurd factory alignment . . . ?
Search function is freeSee that's why there is a forum. It can provide insight and sometimes entertainment. Now from what I have seen you're not much of either. So why don't you try and serve some sort of purpose and answer the question that was posed in the post you quoted?
Please go ahead...dazzle us with your brilliance.![]()
Which is the only reason you have one.Search function is free

Will do. Must have had brain freeze. Should have done that in the first place. I usually email them with a question once sometimes twice a week anyway. Like I said brain freeze.![]()
I switched from divorced 11/14 to true 11/7.I have 12clicks from full firm on front/rear just for rain season here in oregon. And I'm on true rear, 13K. They claimed that they have different valving for Nismo and performance, so that could be a reason. But still doesn't explain why u got half of my spring rate while you have nismo and are in divorced setting(I remember you changed it back to divorced correct?).
Uh huh.You literally needed me to tell you to email Ohlins/Z1
This was you today
Then for me everything look ok then. It bothers me when people use spring rates for other coilovers to judge this one.I switched from divorced 11/14 to true 11/7.
I think OEM is roughly 10.5 front and rear. With a true rear that equates to wheel rates of 10.5f and around 5k rear. But a well damped 14k wheel rates can be less harsh than a cheaply damped 10k. Just wondering with Ohlins, whether R&T or FPSpec where people start barking about too stiff.
This is Google AI on spring rates and wheel rates for the Z (same geometry/math for the 370Z).
![]()
Uh huh.
Is there a point you're trying to make or should we settle for the one on top of your head?
Still waiting.
Your surrender has been duly noted.
Your surrender has been duly noted.
Appreciate the feedback. Exactly why I posted it. In fairness to my mechanic he can pretty much dial it in anyway I want. Keep in mind that I'm using the car for spirited road and not track. Getting feedback on this not because it is the final product but more of a - where do you think it should go from here.@Durango 95 I will try to explain.
Your alignment guy gave you a commuter alignment that is worse than even stock. No offense to him, but he works at pep boys and that is the kind of alignment they would give. Take it to a actual performance shop. It will cost more, but that last mile alignment is how you get value from your ohlins.
We have a lot of weight on the nose. That low of a front camber will cause severe understeer on a Z. Your front tires are going to roll over and eat up the outside front tires with any kind of spirited driving.
The reason to buy SPL arms is to get more negative. Try for at least -1.8. Otherwise really no point in having these if that is too much for you. Also get more caster if you can.
Positive front toe is going to drag your tires and numb your steering. The rear toe is a bit excessive as well.
For what it is worth, this is my oem alignment on my Nismo. It is all I could get from the front and wish I had more.
Alignment is more important than parts.
My first suspension upgrade will be SPL front camber arms so I can dial this up to -1.8 front and about -2.3 rear, which is to me a street setup. For the track I would go even more.
![]()