Sponsored

Ohlins Coilover Setup

RSS

Well-Known Member
First Name
Scott
Joined
May 23, 2025
Threads
0
Messages
50
Reaction score
16
Location
Indy
Car(s)
‘24 Z
I understand some but that much was throwing me. Thanks!
 

RSS

Well-Known Member
First Name
Scott
Joined
May 23, 2025
Threads
0
Messages
50
Reaction score
16
Location
Indy
Car(s)
‘24 Z
nah i'm gonna keep pointing out the stupid shit that goes on here

seriously wonder why people here even bought a Z
LOL Because I couldn’t talk myself into a FF5 Daytona yet.
 

Durango 95

Well-Known Member
Joined
Jul 29, 2026
Threads
0
Messages
85
Reaction score
59
Location
West Coast Florida
Car(s)
2026 Nissan Z Performance
DId you throw almost $10K in parts at your car to run the absurd factory alignment . . . ?
See that's why there is a forum. It can provide insight and sometimes entertainment. Now from what I have seen you're not much of either. So why don't you try and serve some sort of purpose and answer the question that was posed in the post you quoted?

Please go ahead...dazzle us with your brilliance. :rolleyes:
 

OptionZero

Well-Known Member
Joined
Oct 25, 2023
Threads
3
Messages
382
Reaction score
303
Location
Norcal
Car(s)
2015 370Z Nismo
See that's why there is a forum. It can provide insight and sometimes entertainment. Now from what I have seen you're not much of either. So why don't you try and serve some sort of purpose and answer the question that was posed in the post you quoted?

Please go ahead...dazzle us with your brilliance. :rolleyes:
Search function is free
 

OptionZero

Well-Known Member
Joined
Oct 25, 2023
Threads
3
Messages
382
Reaction score
303
Location
Norcal
Car(s)
2015 370Z Nismo
You literally needed me to tell you to email Ohlins/Z1

This was you today

Will do. Must have had brain freeze. Should have done that in the first place. I usually email them with a question once sometimes twice a week anyway. Like I said brain freeze. (y)
 
OP
OP
FSUZ33

FSUZ33

Well-Known Member
First Name
Chad
Joined
Feb 23, 2025
Threads
46
Messages
1,597
Reaction score
2,019
Location
Tallahassee, FL
Car(s)
‘24 Z NISMO
I have 12clicks from full firm on front/rear just for rain season here in oregon. And I'm on true rear, 13K. They claimed that they have different valving for Nismo and performance, so that could be a reason. But still doesn't explain why u got half of my spring rate while you have nismo and are in divorced setting(I remember you changed it back to divorced correct?).
I switched from divorced 11/14 to true 11/7.
I think OEM is roughly 10.5 front and rear. With a true rear that equates to wheel rates of 10.5f and around 5k rear. But a well damped 14k wheel rates can be less harsh than a cheaply damped 10k. Just wondering with Ohlins, whether R&T or FPSpec where people start barking about too stiff.

This is Google AI on spring rates and wheel rates for the Z (same geometry/math for the 370Z).

1794277488739-e1.webp
 

Suzuyabot

Well-Known Member
First Name
Dante
Joined
Oct 9, 2024
Threads
2
Messages
75
Reaction score
45
Location
PNW
Car(s)
2024 Nissan Z Nismo
I switched from divorced 11/14 to true 11/7.
I think OEM is roughly 10.5 front and rear. With a true rear that equates to wheel rates of 10.5f and around 5k rear. But a well damped 14k wheel rates can be less harsh than a cheaply damped 10k. Just wondering with Ohlins, whether R&T or FPSpec where people start barking about too stiff.

This is Google AI on spring rates and wheel rates for the Z (same geometry/math for the 370Z).

1794277488739-e1.webp
Then for me everything look ok then. It bothers me when people use spring rates for other coilovers to judge this one.
 

Murix

Well-Known Member
Joined
Jun 1, 2024
Threads
0
Messages
109
Reaction score
126
Location
SF Bay Area
Car(s)
Nismo Z, Abarth 124, Volvo C30
@Durango 95 I will try to explain.

Your alignment guy gave you a commuter alignment that is worse than even stock. No offense to him, but he works at pep boys and that is the kind of alignment they would give. Take it to a actual performance shop. It will cost more, but that last mile alignment is how you get value from your ohlins.

We have a lot of weight on the nose. That low of a front camber will cause severe understeer on a Z. Your front tires are going to roll over and eat up the outside front tires with any kind of spirited driving.

The reason to buy SPL arms is to get more negative. Try for at least -1.8. Otherwise really no point in having these if that is too much for you. Also get more caster if you can.

Positive front toe is going to drag your tires and numb your steering. The rear toe is a bit excessive as well.

For what it is worth, this is my oem alignment on my Nismo. It is all I could get from the front and wish I had more.

Alignment is more important than parts.

My first suspension upgrade will be SPL front camber arms so I can dial this up to -1.8 front and about -2.3 rear, which is to me a street setup. For the track I would go even more.

1794281975933-xa.webp
 

Durango 95

Well-Known Member
Joined
Jul 29, 2026
Threads
0
Messages
85
Reaction score
59
Location
West Coast Florida
Car(s)
2026 Nissan Z Performance
@Durango 95 I will try to explain.

Your alignment guy gave you a commuter alignment that is worse than even stock. No offense to him, but he works at pep boys and that is the kind of alignment they would give. Take it to a actual performance shop. It will cost more, but that last mile alignment is how you get value from your ohlins.

We have a lot of weight on the nose. That low of a front camber will cause severe understeer on a Z. Your front tires are going to roll over and eat up the outside front tires with any kind of spirited driving.

The reason to buy SPL arms is to get more negative. Try for at least -1.8. Otherwise really no point in having these if that is too much for you. Also get more caster if you can.

Positive front toe is going to drag your tires and numb your steering. The rear toe is a bit excessive as well.

For what it is worth, this is my oem alignment on my Nismo. It is all I could get from the front and wish I had more.

Alignment is more important than parts.

My first suspension upgrade will be SPL front camber arms so I can dial this up to -1.8 front and about -2.3 rear, which is to me a street setup. For the track I would go even more.

1794281975933-xa.webp
Appreciate the feedback. Exactly why I posted it. In fairness to my mechanic he can pretty much dial it in anyway I want. Keep in mind that I'm using the car for spirited road and not track. Getting feedback on this not because it is the final product but more of a - where do you think it should go from here. (y)
 
Last edited:
 






Top