LibertyWalk Front Bumper Installation test and thoughts

[chaoticyle]

Just got my LB front bumper today and had it on for a test. Will have it painted soon for further installation, any suggestion before the actual project? Do I simply stick all the OEM wiring and ACC radar compartment onto the new bumper or is there a better way? Also a lil reminder for those who chose to install your plate sideways. You might need a longer pole attaching your tow hook, in order for your plate to be better placed. Because LB bumper is a lot longer than the OEM one. Here are some pics.

 

[haohmaru]

That's giving me McLaren vibes.

 

[Tranzor Z]

That's rad AF

 

[FSUZ33]

Nice! I didn't realize the LBWK front fit the factory fenders. Can't help with radar/sensors and stuff. Good luck with that though. Based on posts here about the sensors they can be picky beasts. Curious how well the radar works through that FRP panel. Mine doesn't like it when it's barely foggy out.

 

[Meg_Z]

That's giving me McLaren vibes.

Just got my LB front bumper today and had it on for a test. Will have it painted soon for further installation, any suggestion before the actual project? Do I simply stick all the OEM wiring and ACC radar compartment onto the new bumper or is there a better way? Also a lil reminder for those who chose to install your plate sideways. You might need a longer pole attaching your tow hook, in order for your plate to be better placed. Because LB bumper is a lot longer than the OEM one. Here are some pics.

As the saying goes to each their own. There is no way I would add that to my Z!

 

[Bumflik]

Now you get an A+ for the balls to make your Z different! That's my mission as well. They shipped it in that protective box! I love it. A must for shipping bumpers. Can't trust shippers.

 

[chaoticyle]

Nice! I didn't realize the LBWK front fit the factory fenders. Can't help with radar/sensors and stuff. Good luck with that though. Based on posts here about the sensors they can be picky beasts. Curious how well the radar works through that FRP panel. Mine doesn't like it when it's barely foggy out.

Yeah I wasn't sure if they fit the factory fender at first but I saw someone with the same setup. Personally I would prefer only installing the bumper, other mods seemed a bit too much for me. Thank you, will update soon after the paint job!

 

[chaoticyle]

Now you get an A+ for the balls to make your Z different! That's my mission as well. They shipped it in that protective box! I love it. A must for shipping bumpers. Can't trust shippers.

Thanks bro, thought I could put on a new face for my Z embracing 2026!

 

[Bumflik]

Thanks bro, thought I could put on a new face for my Z embracing 2026!

It doesn't throw off the RZ34's fibinocci golden ratio. I wouldn't expect anything less from Liberty Walk.

 

[alienpoker]

My only comment is to be sure paint prep is done right, there are usually flaws in the mould. Make sure they use adhesion promoter before primer. Awesome mod.

 

[Georges1]

That is going to look great. Anxious to see the finished product.

 

[chaoticyle]

It doesn't throw off the RZ34's fibinocci golden ratio. I wouldn't expect anything less from Liberty Walk.

Not gonna lie, this bumper and the look of it had been dwelling in me for quite a while! And it's simply gorgeous.

 

[chaoticyle]

My only comment is to be sure paint prep is done right, there are usually flaws in the mould. Make sure they use adhesion promoter before primer. Awesome mod.

Thank you, I will definitely inform the paint crew!

 

[Bumflik]

Not gonna lie, this bumper and the look of it had been dwelling in me for quite a while! And it's simply gorgeous.

Kato of LW is a genius artist! Yea I knew they would love adding their touch on the RZ34.

 

[alutwon]

Did you get the front diffuser with this bumper? I saw the pics on the Libertywalk website but they only had the full bodykit on display. I'm curious to see just the front bumper with their diffuser