What did you do with your Z today? 🙋🏻‍♂️

[Ikazuchi6]

Changed the map and hatch lights to LED. Ordered the vanity light LEDs bc now they look awful lol

 

[77AkumaNoZetto]

Changed the map and hatch lights to LED. Ordered the vanity light LEDs bc now they look awful lol

Where did you get you LED's from and what bulb is the one for the vanity?

 

[Ikazuchi6]

Where did you get you LED's from and what bulb is the one for the vanity?

I got these off Amazon.
https://www.amazon.com/Interior-Lig...=Vehicle_ReplacementParts_m&hvcampaign=dsamob

They give you 6 LEDs plus the trim tool. The hatch lens pops off from the driver's side, just FYI. I only used 3 of the bulbs...couldn't find any other lights. I thought 2 might go for the license plate but those are bright enough already and there isn't one in the glove box. Did earlier Zs have glovebox lights? Sometimes there's still a connector and you just need the pigtail to add one. I'm going to look into that eventually.

Researching it looks like these are the correct bulbs for the vanity. I'll update when they arrive...

I tried like hell to remove the entire mirror assembly from the sunvisor only to realize just the rectangular lens pops off...

https://www.amazon.com/Diode-Dynamics-compatible-Infiniti-2014-2017/dp/B09JTZVZPK?th=1

 

[Bumflik]

Car wash (touch brush) is like you taking a bath in a public tub bath after a 1000 people.

Contact Car Wash is for cars that you don't care about the paint .Beaters and A to B cars .

 

[FSUZ33]

Wife and daughter washed mine yesterday while I was napping. Wheels are glossy and black for the first time in like 2 months.
my
…and mytoo!

 

[tractng]

Spent the weekend installing the RS-R springs. Subtle drop but it now rides really good. Less floaty. An observation for the top 3 nuts for the strut/shock mount, the Z uses 12 mm. My old Miata used 14 mm for such small car. I like the fact that Nissan used the large bolt that goes through the lower arm for the shock instead of over it. No worry about pushing the lower part of the assembly down with force during the installation.

The driver side 12 mm nut (top) was a pain since wires were over it. I had to use a crow foot wrench for that.

 

[sdktheway]

Track days 12-15 with a 3 day weekend starting at AMP and then over to Road Atlanta.

Quick front pad change. The carbotech pads were pre-bed, so no need to worry about bedding them in before taking them on track.

Terrible photo of that amazing Midnight Purple color

 

[Bumflik]

Spent the weekend installing the RS-R springs. Subtle drop but it now rides really good. Less floaty. An observation for the top 3 nuts for the strut/shock mount, the Z uses 12 mm. My old Miata used 14 mm for such small car. I like the fact that Nissan used the large bolt that goes through the lower arm for the shock instead of over it. No worry about pushing the lower part of the assembly down with force during the installation.

The driver side 12 mm nut (top) was a pain since wires were over it. I had to use a crow foot wrench for that.

That floaty Cadillac feeling omg. Yea I lowered mine too . Hated that. Not good for a Performance auto meant to be low to the ground .

 

[5amp5on]

Changed out the strut bar with a BLITZ. I like it. Soooooo much lighter than the stock one.

 

[sarge]

I installed Bonoss spacers today. 20 mm front and 25mm rear. They are much better quality than the other set I ordered but returned (no names, the customer service on the return was top notch) It took 10 days to get them from China and I had to pay extra for the tariffs. $350 delivered, the extra $ was worth the upgrade in quality.

The alignment wasn’t off too bad. The rears were fine the front needed toe in.

I definitely recommend Bonoss

 

[Bumflik]

I installed Bonoss spacers today. 20 mm front and 25mm rear. They are much better quality than the other set I ordered but returned (no names, the customer service on the return was top notch) It took 10 days to get them from China and I had to pay extra for the tariffs. $350 delivered, the extra $ was worth the upgrade in quality.

The alignment wasn’t off too bad. The rears were fine the front needed toe in.

I definitely recommend Bonoss

Yea they are top quality and great for heat dissipation. Designed for track.

 

[KnightRiderz]

Man ok fam where do I begin. Since the last time I posted i have added a few things. OK first is the aero flow dynamics front lip. Second I added the street aero side skirts. And last a set of ESR wheels wrapped in Continental DWS 06+. 265/35 front and 285/35 rear. Really love how the Z is coming together.

 

[sarge]

So do I!!

 

[KnightRiderz]

So do I!!

Thank you

 

[Bumflik]

Man ok fam where do I begin. Since the last time I posted i have added a few things. OK first is the aero flow dynamics front lip. Second I added the street aero side skirts. And last a set of ESR wheels wrapped in Continental DWS 06+. 265/35 front and 285/35 rear. Really love how the Z is coming together.

Hey love the Aero front lip. Hey what is the width of your wheels?