Sponsored

Two piece rotors anyone?

ZMidlife

Well-Known Member
First Name
Mike
Joined
May 19, 2025
Threads
17
Messages
122
Reaction score
116
Location
Louisiana
Car(s)
2024 Nissan Z
Occupation
Industrial Gas
The Z1 kit is something I keep eyeballing. Pair with lightweight flywheel and nearly 50lbs of Rotational mass
1000050967.webp
 

FSUZ33

Well-Known Member
First Name
Chad
Joined
Feb 23, 2025
Threads
46
Messages
1,598
Reaction score
2,024
Location
Tallahassee, FL
Car(s)
ā€˜24 Z NISMO
The CZP/paragon set lists the same weight saving as the Z1/Akebono/Brembo set. The CZP kit is about $100 less, but I like Z1’s rotor and hat design. One thing maybe to think about, maybe someone more knowledgeable can chime in, the CZP rears have an iron insert in the hats, like Racing Brake’s rear iron sleeves, for the e-brakes. I don’t believe Z1’s description says theirs do, and the short shot in their promo vid doesn’t look like they do, but I could be wrong.

Surprised others haven’t done 2-ps for the Z yet (DBA, AP, …).

IMG_0135.webp


IMG_0134.webp


IMG_0136.webp
 
OP
OP
ZMidlife

ZMidlife

Well-Known Member
First Name
Mike
Joined
May 19, 2025
Threads
17
Messages
122
Reaction score
116
Location
Louisiana
Car(s)
2024 Nissan Z
Occupation
Industrial Gas
The CZP/paragon set lists the same weight saving as the Z1/Akebono/Brembo set. The CZP kit is about $100 less, but I like Z1’s rotor and hat design. One thing maybe to think about, maybe someone more knowledgeable can chime in, the CZP rears have an iron insert in the hats, like Racing Brake’s rear iron sleeves, for the e-brakes. I don’t believe Z1’s description says theirs do, and the short shot in their promo vid doesn’t look like they do, but I could be wrong.

Surprised others haven’t done 2-ps for the Z yet (DBA, AP, …).

IMG_0135.webp


IMG_0134.webp


IMG_0136.webp
Think I'll ping Z1 and ask!
Yeah the rotational mass savings makes the car feel more responsive. This plus a flywheel would make a difference!
 

Nis Mo Z

Well-Known Member
First Name
Moses
Joined
May 30, 2025
Threads
3
Messages
305
Reaction score
664
Location
Loganville, Georgia
Car(s)
2024 Nissan Fairlady Z Nismo EWP
Occupation
service tech
They need to make a kit for the Nismo where the front version is 15 inches. I plan to get that and Conti ECS 02 which is 26lbs lighter than the Dunlaps. Potential 56 lbs loss.
 
OP
OP
ZMidlife

ZMidlife

Well-Known Member
First Name
Mike
Joined
May 19, 2025
Threads
17
Messages
122
Reaction score
116
Location
Louisiana
Car(s)
2024 Nissan Z
Occupation
Industrial Gas
56lbs less will definitely change the car!!
 

Hubert

Hubert
First Name
Hubert
Joined
Feb 17, 2017
Threads
6
Messages
259
Reaction score
327
Location
USA
Car(s)
Z33 NISMO R-tune, RZ34 NISMO

FSUZ33

Well-Known Member
First Name
Chad
Joined
Feb 23, 2025
Threads
46
Messages
1,598
Reaction score
2,024
Location
Tallahassee, FL
Car(s)
ā€˜24 Z NISMO
They need to make a kit for the Nismo where the front version is 15 inches. I plan to get that and Conti ECS 02 which is 26lbs lighter than the Dunlaps. Potential 56 lbs loss.
CZP has the Paragon 2-pc for the NISMO. No front and rear package for NISMO like the Perf, but you can get them separately 380mm front and 350mm rear. Currently on sale, a little over $1,800 for all four corners.

Hubert’s setup above…Racing Brake also has a full NISMO setup for $2,520, plus $240 with pads. Not sure about CZP’s 2-pc, but you can replace rotors/irons only on the Racing Brake setup, currently about $1,550 ($805F, $640R).
 
Last edited:

Thefunk

Well-Known Member
Joined
Apr 13, 2024
Threads
42
Messages
685
Reaction score
494
Location
Long Island
Car(s)
2024 Nissan Z Performance, 2018 Nissan Murano SV
The Z1 2pc rotors are very good. I got the sprinkle slotted kit. They work well with Carbotech pads.
 
 






Top