Sponsored

Stillen Tru Control Z1 Dyno

Nis Mo Z

Well-Known Member
First Name
Moses
Joined
May 30, 2025
Threads
3
Messages
305
Reaction score
664
Location
Loganville, Georgia
Car(s)
2024 Nissan Fairlady Z Nismo EWP
Occupation
service tech
So today I took the Nismo Z to Z1 to see how the Stillen Tru Control performs on 3 maps(I actually did 4 but it was erased)

My car has

B6A intakes
Stillen Comp exhaust
CZP heat exchanger
93 Shell gas


Ok so what I found out on the dyno plays out with how the car felt prior to the dyno. I always felt like Map 3/4 is the safe maps for the Nismo aggressive stock tune and it is.

The first line is Map 3. It did well and didn't pull any timing but compared to a stock Z Nismo dyno at Z1(382-390whp/380-390wtq) it looks like peak whp/wtq is around 30-35whp/100+wtq. Now peak power in the mid range is likely nuts, especially when the torque gains are over 100+wtq.

Now for the bad.

The Nismo literally hates all maps above 3 with these mods and was pulling crazy timing in front of me and Jon at Z1. Map 5 is the second line and Map 7 is the third line. Torque still hovered around 500 wtq give or take but there was some power loss but not.

I think the upper maps were made for the Performance and Sport models tune.

We tried Map 2 as well and that map was 415whp/484wtq with no timing issues. I'm glad I only paid $300 shipped used for my Stillen TC because for $700 it would suck to not be able to use Map 5/6/7 since the Nismo doesn't play well with them.

Dyno runs was done in gear 5.


IMG_E4444.webp
MRSD5136.webp
 

anidroc

Active Member
First Name
Adam
Joined
May 26, 2026
Threads
1
Messages
31
Reaction score
36
Location
Long Island
Car(s)
2024 Nismo Z
So today I took the Nismo Z to Z1 to see how the Stillen Tru Control performs on 3 maps(I actually did 4 but it was erased)

My car has

B6A intakes
Stillen Comp exhaust
CZP heat exchanger
93 Shell gas


Ok so what I found out on the dyno plays out with how the car felt prior to the dyno. I always felt like Map 3/4 is the safe maps for the Nismo aggressive stock tune and it is.

The first line is Map 3. It did well and didn't pull any timing but compared to a stock Z Nismo dyno at Z1(382-390whp/380-390wtq) it looks like peak whp/wtq is around 30-35whp/100+wtq. Now peak power in the mid range is likely nuts, especially when the torque gains are over 100+wtq.

Now for the bad.

The Nismo literally hates all maps above 3 with these mods and was pulling crazy timing in front of me and Jon at Z1. Map 5 is the second line and Map 7 is the third line. Torque still hovered around 500 wtq give or take but there was some power loss but not.

I think the upper maps were made for the Performance and Sport models tune.

We tried Map 2 as well and that map was 415whp/484wtq with no timing issues. I'm glad I only paid $300 shipped used for my Stillen TC because for $700 it would suck to not be able to use Map 5/6/7 since the Nismo doesn't play well with them.

Dyno runs was done in gear 5.
Thanks for doing this I have nismo w/similar bolt ons.
Did you have Stillen update the TruControl for the mods?
 

RHE2026

Well-Known Member
Joined
Jul 14, 2026
Threads
4
Messages
153
Reaction score
100
Location
USA
Car(s)
2026 Heritage Edition
Is there a way to mount the Stillen TC to anything particular in the engine bay? From some pics I have seen its hard to tell.Thx
 

RHE2026

Well-Known Member
Joined
Jul 14, 2026
Threads
4
Messages
153
Reaction score
100
Location
USA
Car(s)
2026 Heritage Edition
Yeah I wasn’t sure because I didn’t see any way of mounting it. Is there any openings where it can be secured with cable ties? I like that the HP gains are decent plus will it let me use other maps on my 26? Thx.
 

thesilverbullet

Well-Known Member
First Name
Silver
Joined
Jun 16, 2024
Threads
10
Messages
907
Reaction score
923
Location
Clemson
Car(s)
ā€˜25 PRFM M/T
Occupation
EE
Awesome job. Did z1 suggest an ecutek tune? They work closely with SOHO for ecutek tuning.

Numbers are not bad for a piggy back. - I'm guessing the lowers are holding the higher maps back…

SOHO got 416whp\473wtq on a bone stock ā€˜25 sport with ecutek…

 

5amp5on

Well-Known Member
First Name
EJ
Joined
Oct 13, 2024
Threads
11
Messages
550
Reaction score
1,084
Location
USA
Car(s)
2026 Pathfinder Platinum, 2024 Z Performance, 2023 Sentra SV
Occupation
Finance
Yeah I wasn’t sure because I didn’t see any way of mounting it. Is there any openings where it can be secured with cable ties? I like that the HP gains are decent plus will it let me use other maps on my 26? Thx.
I zipped mine to the cool A/C line. It's been on two years with no issues and the Performance Z goes crazy maps 5 or above. I always leave it on map 4 unless I'm in a very safe place to get squirly in all gears.
IMG_9474.webp
 
OP
OP
Nis Mo Z

Nis Mo Z

Well-Known Member
First Name
Moses
Joined
May 30, 2025
Threads
3
Messages
305
Reaction score
664
Location
Loganville, Georgia
Car(s)
2024 Nissan Fairlady Z Nismo EWP
Occupation
service tech
Awesome job. Did z1 suggest an ecutek tune? They work closely with SOHO for ecutek tuning.

Numbers are not bad for a piggy back. - I'm guessing the lowers are holding the higher maps back…

SOHO got 416whp\473wtq on a bone stock ā€˜25 sport with ecutek…


Jon did suggest it but he knows I'm not feeling that right now
 

anidroc

Active Member
First Name
Adam
Joined
May 26, 2026
Threads
1
Messages
31
Reaction score
36
Location
Long Island
Car(s)
2024 Nismo Z
Unfortunately I didn't
They recommend having them update it for intakes and exhaust, this really shouldn’t reflect poorly on them without the update.
That being said I had mine updated and the other day in 7 at wot I felt it pull back a little bit so this is top of mind for me.
 

RHE2026

Well-Known Member
Joined
Jul 14, 2026
Threads
4
Messages
153
Reaction score
100
Location
USA
Car(s)
2026 Heritage Edition
It seems I could be looking at a 40 to 50 HP gain on a stock vehicle and it’s all bolt on! How difficult was it to install?
 
 






Top