Hands Up all the Aussies

[West Aussie]

I've dropped off my plates to the dealer, double slims - black and white. "ZPROTO"

Also emailed my dealer as there was screenshots on facebook, and I see they have made it to here too.
All I can say is WOOHOO!! March ETA

WAs laws are antiqaited
We can’t get our plates unless we hand in the original set…can’t do that until car is registered.
So we order, pay and then DOT keeps them until we can swap them out.
So stupid.

 

[Shobotan]

I have also heard from the dealer today. An SMS stating Nissan had my order. I'm not sure what this means, more info would be provided in about week.

 

[Mud]

I noticed a Proto Z outside of Motor Culture Brisbane today.

 

[Beard]

I noticed a Proto Z outside of Motor Culture Brisbane today.

Been there since December. Probably going to be auctioned.

 

[cainen]

WAs laws are antiqaited
We can’t get our plates unless we hand in the original set…can’t do that until car is registered.
So we order, pay and then DOT keeps them until we can swap them out.
So stupid.

Exactly the same as NSW.

The Z went in for its first 'complimentary' service today where I think they pretty much do nothing but check it over with no issues to report. It was at 1700km instead of 1000km scheduled after its unplanned road trip up the coast. The Z performed quite admirably whilst away. It chews up the km's easily and is surprisingly fuel efficient on the freeway drinking about 6L/100km. At 110kmh the auto chugs along around 1500rpm. The manual may drink a bit more. It's not unbearable, but there's definitely a fair amount of tyre roar going on on the freeway.

Got a little bit of driving in up there though the weather was pretty dreadful so not as much as I would have liked for fear of potholes on back country roads. It loves long sweeping corners and I quite enjoyed the 'softness' everyone is complaining about on our rough roads. On smooth roads or the track I can see why you would want to stiffen it up but for 90% of occasions I think it is fine as is. My biggest complaint is still the tyres - I think a decent set will vastly improve the car especially in tighter bends. The slippery tyres were handy though when entertaining the local bogan mullet kids with a burnout in the carpark - as per their request.

It's good to see a bit of excitement returning to the thread with people's orders being confirmed. It's worth the wait

 

[StrikeS30]

Exactly the same as NSW.

The Z went in for its first 'complimentary' service today where I think they pretty much do nothing but check it over with no issues to report. It was at 1700km instead of 1000km scheduled after its unplanned road trip up the coast. The Z performed quite admirably whilst away. It chews up the km's easily and is surprisingly fuel efficient on the freeway drinking about 6L/100km. At 110kmh the auto chugs along around 1500rpm. The manual may drink a bit more. It's not unbearable, but there's definitely a fair amount of tyre roar going on on the freeway.

Got a little bit of driving in up there though the weather was pretty dreadful so not as much as I would have liked for fear of potholes on back country roads. It loves long sweeping corners and I quite enjoyed the 'softness' everyone is complaining about on our rough roads. On smooth roads or the track I can see why you would want to stiffen it up but for 90% of occasions I think it is fine as is. My biggest complaint is still the tyres - I think a decent set will vastly improve the car especially in tighter bends. The slippery tyres were handy though when entertaining the local bogan mullet kids with a burnout in the carpark - as per their request.

It's good to see a bit of excitement returning to the thread with people's orders being confirmed. It's worth the wait

Thats actually pretty good fuel mileage, we do the L/100 here in Canada land too. Nice to see she's a good low revver at highway speeds

 

[fliplover]

Good to know…I was looking at getting slims, just wanted to be sure before I did the order.
Now to decide what I want to put on it

Any suggestions?? Anyone??

Just based on your user name, how about 'WEST AU Z'?

 

[cainen]

Now to decide what I want to put on it

Any suggestions?? Anyone??

How about LONGW8? Or LATE Z?

 

[loudsx]

Good to know…I was looking at getting slims, just wanted to be sure before I did the order.
Now to decide what I want to put on it

Any suggestions?? Anyone??

couldn't see how to do this one on WA site so used Vic's

but the reality plates are very you specific.
WA is also lucky that you have 9 char to play with rather than the usual 6 (that said The shorter always looks better)

are you lloking to add in details like:

• name
• model
• brand
• something about yourself?
• something else?

 

[morgand]

Gees, plates are cheap over in WA compared to comparable combination in Qld...

And so many good combinations available...

 

[SRF]

Not Aus but close enough

Picking mine up this Friday.

 

[West Aussie]

Thanks for all the suggestions guys.
…gotta admit I’m tempted to use the long wait one ?
Yes plates are pretty cheap but they do vary …funny enough the ones you can put whatever you like and not restricted to a certain amount of numbers or letters are mid range.

@SRF nice …congratulations and enjoy

 

[Hammo25]

Thanks for all the suggestions guys.
…gotta admit I’m tempted to use the long wait one ?
Yes plates are pretty cheap but they do vary …funny enough the ones you can put whatever you like and not restricted to a certain amount of numbers or letters are mid range.

@SRF nice …congratulations and enjoy

I like the BIGWAIT one (or LONGW8 nut not BIGW8 - sounds like a budget department store).

 

[Hammo25]

I like the BIGWAIT one (or LONGW8 nut not BIGW8 - sounds like a budget department store).

or how about W8D4EVR

 

[cainen]

Hi. I have been watching and reading this thread for a long time - but this is my first post. I have a blue manual coupe on order - but until today had not driven the car. Decided I should test a manual demonstrator at my local dealer. Drove it this morning. I like the car overall - but was dismayed by the rev hang when upshifting through the gears. Has anyone else experienced this? I have driven manual cars for years - so I don't think it is me. The rev hang is spoiling the fun as it makes the upshifts jerky and unnatural.

I have noticed it in a few reviews. I wonder if it is a side effect of rev matching? Maybe try turning it off?