West Aussie
Well-Known Member
- Thread starter
- #3,961
Gotta say…you know the world is in bad shape when the kiwis are getting their cars firstNot Aus but close enough
Picking mine up this Friday.
Gotta say…you know the world is in bad shape when the kiwis are getting their cars firstNot Aus but close enough
Picking mine up this Friday.
Could be as easy as the month you "ordered"Good to know…I was looking at getting slims, just wanted to be sure before I did the order.
Now to decide what I want to put on it
Any suggestions?? Anyone??
Ahh damn. I was hoping the Z would be "old school" enough to miss the rev hang. Does it do it at low/mid revs too?It felt weird because the revs would not drop quickly after releasing the clutch when changing gears at high rpm - which made the process feel clumsy - jerky. Maybe I need more practice with the car.
I'd say it was an emissions thing for an older engine to help and burn off any excess.Ahh damn. I was hoping the Z would be "old school" enough to miss the rev hang. Does it do it at low/mid revs too?
From memory, I think it does it from about 3500-4000rpm and up - but it is most noticeable when launching hard and revving out close to the redline.Ahh damn. I was hoping the Z would be "old school" enough to miss the rev hang. Does it do it at low/mid revs too?
It’s pretty easy to understand.Could be as easy as the month you "ordered"
APR21 or MAR21
You'd have to decide which one it was though. Seems to change around
These popup 'giveaway' clubs seem so scammy yet they get so much social media engagement.
I'm very keen for some skidpan days, going from AWD for the past decade, to RWD will have me nervous.The blue Vic registered press car featured here
https://www.whichcar.com.au/reviews/2023-nissan-z-review-australian-first-drive
seems to have made its way to Skid Control Qld for a skid pan day
It's an issue on the 370 too, VDC when off still intervenes doing a brake stand burnout and cuts the power, pain in the ass for drags as you can't get heat into the tyres. Can be bypassed by pulling the fuse or bypassing the brake pedal switch. ECUtek is working on a solution for it in their tunesThey say the Z can't do a burnout but I've seen a few vids of them doing donuts and now at a skidpan. I guess it's only when the brakes are applied at the same time there's a problem with it cutting out?
Off to Victoria...Spotted at Motor Culture Australia, Brisbane.
VIN: JN1GBAZ34A0200235
Rego: expires 27/11/23
Fresh rego, must have been one of the recent arrivals.