Will these wheels fit?

Landon

Well-Known Member
First Name
Landon
Joined
Mar 27, 2024
Threads
27
Messages
125
Reaction score
30
Location
United States
Car(s)
2024 NISSAN Z, 2025 Tesla Model 3
I am looking at some wheels or these sizes but not sure if they will fit the 2024 Nissan Z:

Front: 19x10 (35 offset)
Back: 19x11 (50 offset)

Thanks for any advice!
 

FSUZ33

Well-Known Member
First Name
Chad
Joined
Feb 23, 2025
Threads
15
Messages
302
Reaction score
305
Location
Florida
Car(s)
‘24 BDP Z NISMO
Compared to the NISMO fitment:

Front should fit fine. Same size, but shifted in 2mm.

Rear is a different story. Inner lip sits 34mm further in, and the outer lip tucked 20mm.
Running a 30mm spacer on the rear might work, but I’m not certain.
With a 30mm spacer the outer lip would sit like a NISMO with 10mm spacers (or a Perf with 23mm spacers). The inner lip will still be 4mm further in, about 1/8”, and I assume there’s more than 1/8” of suspension clearance on the stock NISMO.
 
OP
OP

Landon

Well-Known Member
First Name
Landon
Joined
Mar 27, 2024
Threads
27
Messages
125
Reaction score
30
Location
United States
Car(s)
2024 NISSAN Z, 2025 Tesla Model 3
Alright, I found 2 more sets and I believe these sets are getting closer to fit my Z:

FRONT: 19x10 (35mm offset)
REAR: 19x11 (24mm offset


FRONT: 19x10 (35mm offset)
REAR: 19X11 (25MM offset)


I am trying to find a set that does not require spacers. Which set above is the correct set? If neither of those sets will work, I will continue to look further.
 
Last edited:

ForSale24

Well-Known Member
First Name
Ron G.
Joined
Apr 11, 2024
Threads
3
Messages
70
Reaction score
48
Location
Phoenix
Car(s)
2024 Nissan Z
Work Wheels ZR10 19x9.5 +23
Work Wheels ZR10 19x10.5 +15
Michelin Pilot Sport 4S 265 & 295
This is my set up, it's kinda an aggressive fit with no room to "push" out or in. You can almost see the "tire hairs" poking no spacers... A +50 offset just sounds all wrong. Stock is +23 in the rear

IMG_20250507_104554519_HDR.jpg


IMG_20250507_104625251_HDR.jpg


IMG_20250507_104656815_HDR.jpg
 

FSUZ33

Well-Known Member
First Name
Chad
Joined
Feb 23, 2025
Threads
15
Messages
302
Reaction score
305
Location
Florida
Car(s)
‘24 BDP Z NISMO
FRONT: 19x10 (35mm offset)
REAR: 19x11 (24mm and 25mm offset)
The 1mm rear offset difference isn’t enough to matter. Between those two consider which one you like more vs the price.

Front practically identical to the stock NISMO front. That would be 13mm further out than a stock Perf. To get the same look as @ForSale24 on the front you would need 12mm spacers.

Rear would poke 6mm further out than a stock NISMO. Almost indistinguishable from ForSale24’s rear (2mm or 3mm inset). Inside clearance is unknown. Inner lip is 7mm or 8mm (0.28” to 0.31”) further in than the stock Performance rears. I assume there’s 1/3” to play with back there, but zero guarantees from me.

You need to poke around https://www.willtheyfit.com/
Plug in a few spec’s and it will do all the math for you.
 
 






Top