Wheel Center Caps

[FSUZ33]

Are these standard, like "38mm" or they sort of custom for each wheel? You don't really see sizes on them, although a few have diameter spec'd.
My '24 NISMO came with the NISSAN center caps. I'd like something solid black and don't want to paint/modify what I have. It's sort of a shot in the dark as to what would fit, other than the OEM "NISSAN" or "Z" caps. Would a RAYS cap fit? Maybe the NISMO LMGT4 center caps?

Plan to install the black RAYS lug nuts I bought with the Z1 wheels for my Z33 and the silver ring and logo on the center caps will stand out even more.
I know. It's petty. We're all going through our own crap, and this is mine right now! ?

Edit: RAYS lug nuts (conical) don’t fit OEM wheels. Never installed, and sold the RAYS nuts.

 

[iapalmer]

Are these standard, like "38mm" or they sort of custom for each wheel? You don't really see sizes on them, although a few have diameter spec'd.
My '24 NISMO came with the NISSAN center caps. I'd like something solid black and don't want to paint/modify what I have. It's sort of a shot in the dark as to what would fit, other than the OEM "NISSAN" or "Z" caps. Would a RAYS cap fit? Maybe the NISMO LMGT4 center caps?

Plan to install the black RAYS lug nuts I bought with the Z1 wheels for my Z33 and the silver ring and logo on the center caps will stand out even more.
I know. It's petty. We're all going through our own crap, and this is mine right now! ?

I custom make caps for the new Z cars…
I make them to order and can do any color combo you’d like…

look me up on Instagram @thezcapguy

 

[Meg_Z]

How much are they?

 

[Exciter]

I custom make caps for the new Z cars…
I make them to order and can do any color combo you’d like…

look me up on Instagram @thezcapguy

I have these on my car. A mate and I bought some and we both love them.

The clips needed a tiny bit of sanding on a couple of them to get them to fit, as they were very tight, but it wasn't a big job. They have not shifted in 3000km including a lot of shitty bumpy roads and some rock hard aftermarket suspension.

I used cloth tape to remove the stock caps. They are 2 piece, the Nissan logo clips into the stock cap. Just press the middle of a length of tape onto the (clean) cap and give it a strong, straight yank to pull it out. Alternatively, you could use a trim tool to pry off the logo and then grip the cap through the clip holes. Or do it the hard way and remove the wheel and push it out from behind.

I think we paid around $200 AUD shipped for 2 (different) sets.

 

[iapalmer]

I have these on my car. A mate and I bought some and we both love them.

The clips needed a tiny bit of sanding on a couple of them to get them to fit, as they were very tight, but it wasn't a big job. They have not shifted in 3000km including a lot of shitty bumpy roads and some rock hard aftermarket suspension.

I used cloth tape to remove the stock caps. They are 2 piece, the Nissan logo clips into the stock cap. Just press the middle of a length of tape onto the (clean) cap and give it a strong, straight yank to pull it out. Alternatively, you could use a trim tool to pry off the logo and then grip the cap through the clip holes. Or do it the hard way and remove the wheel and push it out from behind.

I think we paid around $200 AUD shipped for 2 (different) sets.

Glad you are liking them!!! If they do ever give you any problems please let me know.

 

[Meg_Z]

I purchased these OEM caps part# TW98W3-6GP0A. They’re a perfect fit.

 

[Stefanovich]

I purchased these OEM caps part# TW98W3-6GP0A. They’re a perfect fit.

Looks great, did you get from a dealer and what did you pay for them?

 

[Meg_Z]

Looks great, did you get from a dealer and what did you pay for them?

I ordered them from dealer, don’t remember what I paid, but will check invoice and post later.

 

[Mud]

Are these standard, like "38mm" or they sort of custom for each wheel?

Did we find out the size of these ?

 

[AlanZ]

I was thinking if anyone has ever used rays center caps for the stock performance wheels. Is that corny?

 

[FSUZ33]

Did we find out the size of these ?

I have not.

 

[Wangan_Z]

I swapped mine out for the OEM "Z" logo ones. Here are the measurements I came up with (in mm's):

Outside Dimension

Inside Dimension

 

[Drago86]

I swapped mine out for the OEM "Z" logo ones. Here are the measurements I came up with (in mm's):

Outside Dimension

Inside Dimension

Thank you for this!

 

[Wangan_Z]

You're welcome. I just happen to come across my original ones while cleaning out a garage cabinet.

 

[trackratZ]

I'll help a bit here, see attached, perfect fit direct replacement, pops in securely.