Stillen TruControl

[Nis Mo Z]

One other thing. Stillen didn't make the TruControl. Racechip makes these boxes then makes a deal with companies like Stillen and others(Vivid Racing) to sell it by another name. There's likely some differences but it's not a genuine Stillen product like their exhaust system

 

[Nis Mo Z]

So great news today fellas! I setup an appointment with Z1 to have them dyno my Nismo with B6A intakes, CZP HX and Stillen Comp exhaust using the Stillen Tru Control. I will be able to do 3 runs for $180 and since I know what a Nismo does on Z1’s dyno Im not going to do a off mode dyno run for starters, instead I’ll do the most aggressive of the low, mid and high maps and see how my Nismo feels about all 3.

Map 3(1.5 psi) low

Map 5(2.5 psi)

Map 7(3.5psi) high

Date is set for Nov 9th since Z1 stays busy and that’s my next weekday day off. Will report back with dyno numbers and if the motor likes it or not.

 

[FSUZ33]

I assume that's simply pulls, no tweaking/tuning, just changing TruControl maps in between?

 

[jacksonmagnet]

Get a street tune

 

[Nis Mo Z]

I assume that's simply pulls, no tweaking/tuning, just changing TruControl maps in between?

Exactly! Plus I want to see what’s happening with parameters

 

[FSUZ33]

Remind me, what are NISMOs pulling?

 

[Nis Mo Z]

Remind me, what’s the NiSMO pulling as the wheels?

I've seen a range of 380-390whp on a couple Nismo Z. However the first manual Nismo Z for Z1 did 393whp on a motor that wasn't even broken in.

 

[FSUZ33]

9-10% driveline loss (380-385 wheel) with 420 crank.
seeing about the same loss with torque (350-355 wheel)?

 

[Nis Mo Z]

9-10% driveline loss (380-385 wheel) with 420 crank.
seeing about the same loss with torque (350-355 wheel)?

380-395 wtq is the range for all the ones I've seen. The Z1 manual was 393whp/391 wtq. I wish the auto Z's had the CF driveshaft because that might be the biggest reason why the manual has slightly better drivetrain losses.

 

[DBZinTN]

local coming your way Z1, have him buy lunch for tech and Amanda

 

[_ds_]

380-395 wtq is the range for all the ones I've seen. The Z1 manual was 393whp/391 wtq. I wish the auto Z's had the CF driveshaft because that might be the biggest reason why the manual has slightly better drivetrain losses.

Hmmm... I wonder if the CF driveshaft from the NISMO will fit on the 'lesser' spec cars. Anyone know?

 

[Nis Mo Z]

Hmmm... I wonder if the CF driveshaft from the NISMO will fit on the 'lesser' spec cars. Anyone know?

All manuals have it. Sport and Performance as well but all 9AT is steel driveshaft