FS: Stock OEM Kick Plates

[traska_rz34]

Selling my stock plastic kick plates off my 2024 Z. Installed the illuminated ones shortly after buying the car. Mint condition. Includes the small plastic clips to secure them. Selling the set for $75 OBO (includes shipping).

 

[MattJ2020]

Where’d you get the illuminated ones and how are they connected?

 

[traska_rz34]

Where’d you get the illuminated ones and how are they connected?

I got the dark metallic ones with the accessory adapters already attached for $200 on eBay in like new condition. Made it insanely easy and way cheaper.

 

[Invisible Man]

GLWS and what are the accesory adapters required to install the illuminated sills?

 

[traska_rz34]

GLWS and what are the accesory adapters required to install the illuminated sills?

If you look at the listings directly from Nissan, they show this:

All (may require Accy Service Connector T99F6-4RA0A if not already installed on vehicle).

It’s basically a connector that handles all wiring for dealer accessories. The illuminated kick plates use two of the wires in the bundle on the connector. Once wired up, the connector has a plug that connects under the dash on each side.

 

[JamesParks]

Selling my stock plastic kick plates off my 2024 Z. Installed the illuminated ones shortly after buying the car. Mint condition. Includes the small plastic clips to secure them. Selling the set for $75 OBO (includes shipping).

Let's see a Pic if the illuminated ones after. Guessing they look great. Nice upgrade.

 

[traska_rz34]

Let's see a Pic if the illuminated ones after. Guessing they look great. Nice upgrade.

Here you go!

 

[JamesParks]

Oh my. That is very nice.

 

[Nice boat]

Here you go!

Hi, do you recall if the wiring and hardware(Including length and the connectors) are the exact same on the both sides(Passenger and driver)? Since I'm looking to import a set of RHD Fairlday Z kick plates and I'm wondering if there are any differences to the LHD variant. Pic for reference.

 

[traska_rz34]

Hi, do you recall if the wiring and hardware(Including length and the connectors) are the exact same on the both sides(Passenger and driver)? Since I'm looking to import a set of RHD Fairlday Z kick plates and I'm wondering if there are any differences to the LHD variant. Pic for reference.

Those look cool! And no, I believe they're the same for both sides. You'll just need to make sure to get two of them. I believe this is the part # - T99F6-4RA0A

 

[Nice boat]

Those look cool! And no, I believe they're the same for both sides. You'll just need to make sure to get two of them. I believe this is the part # - T99F6-4RA0A

Thanks for getting back! So basically both sides has the same cables and hardwares, and just connect them to the fuse box at each footwell?

 

[MattJ2020]

Will
This work on AUS spec cars?

 

[traska_rz34]

Thanks for getting back! So basically both sides has the same cables and hardwares, and just connect them to the fuse box at each footwell?

Correct. When I ordered mine, they were used but already included both of the harnesses already attached. Very easy install.

Will
This work on AUS spec cars?

Are you referring to Nice boat’s illuminated plates or the ones for sale?

 

[Mr&Mrs]

Hi, do you recall if the wiring and hardware(Including length and the connectors) are the exact same on the both sides(Passenger and driver)? Since I'm looking to import a set of RHD Fairlday Z kick plates and I'm wondering if there are any differences to the LHD variant. Pic for reference.

I had Illuminated Kickplates from the factory but had to cut and add new ends to the wires for my JDM plates to work "plug and play". Its been so long I forget why it didnt work, but the harness is a little different. I didnt want to run a new one so I made something work lol