Advan GT Beyond Ordered and Inbound: Now I need some locking lug nuts...

[SleepyD7]

Ok finding a leverless (touchless) mounting machine locally has proven to be very challenging. Anyone in the Gainesville/Ocala FL area know of one?

Specs are Advan GT Beyond Copper Bronze 19x9.5 +29 19x10.5 +24

 

[2Cool]

Use the Tirerack installer search engine: https://www.tirerack.com/installers...k3WOVvSuIOgHEBNChrgNyupum9MCVnQ2s7V4TJ3zc9PrI

 

[OptionZero]

Ok finding a leverless (touchless) mounting machine locally has proven to be very challenging. Anyone in the Gainesville/Ocala FL area know of one?

Specs are Advan GT Beyond Copper Bronze 19x9.5 +29 19x10.5 +24

is that sale final or is there a return period

 

[SleepyD7]

Purchased from a private seller so final. I’m sure more aggressive fitments exist. Shooting for that oem+ look

 

[OptionZero]

i'm just sayin

a nismo 370Z comes with 19x10.5 +23 in the rear and it looks sunken AF

sell the fronts

put the 19x10.5 +24 in front

get some 20x12 +20's (GTR rear size) for your back

 

[Exquisite_Red]

OP, you have to be careful, a lot of those who like to comment passionately in offset threads are the people who like this type of shit:

Here is what 10.5 +22 actually looks like. The top of the wheel is flush with the fender and the bottom ~3/4 of the tire extends beyond the bodywork. This is stock height and camber. This is perfect fitment for OEM+, IMO.

 

[SleepyD7]

OP, you have to be careful, a lot of those who like to comment passionately in offset threads are the people who like this type of shit:

Here is what 10.5 +22 actually looks like. The top of the wheel is flush with the fender and the bottom ~3/4 of the tire extends beyond the bodywork. This is stock height and camber. This is perfect fitment for OEM+, IMO.

Nice. Yes that looks right to me as-well.

 

[OptionZero]

OP, you have to be careful, a lot of those who like to comment passionately in offset threads are the people who like this type of shit:

Here is what 10.5 +22 actually looks like. The top of the wheel is flush with the fender an the bottom ~3/4 of the tire extends beyond the bodywork. This is stock height and camber. This is perfect fitment for OEM+, IMO.

This is willful ignorance

As i said - the FACTORY NISMO comes with a 19x10.5 +23

OP has 19x10.5 +24

it is literally worse than stock by a hair

So you can listen to a dumbass who is scared of what they dont understand

or you can listen to someone whos done both street and track setups

18x11 +16 square

19x10-1, 19x11-6

20x11 +15, 20x12 +20

20x10 +3, 20x11, -1

Nice. Yes that looks right to me as-well.

Advan GT's are not cheap, they're a grand per wheel new

Why would you spend that much for worse than factory fitment in the rear

 

[SleepyD7]

Option you spent $$$ modifying your toe arms and coils to achieve your Z34's fitment. It looks amazing bra. For me, at this stage of my ownership journey, I value ride quality and am concerned with the resale implications of changing the suspension in a way that nullifies factory sensor systems. Not saying I won't drop my RZ34 on air or Ohlins one day: just not this day.

 

[OptionZero]

just keep your factory wheels
throw the money in a savings account for when its time to get serious

buying used wheels, even at a discount, you'll never get the value back

all the factory sensors work except for with my track wheels, since i didn't bother getting another set of TPMS sensors

as long as you transfer and reset TPMS sensors and stay within 3% diameter front and rear the speedo will be fine

 

[Exquisite_Red]

woof

OP, asked for OEM+ and you suggested 10.5 +24 for the front, lol. GTFOH

 

[OptionZero]

His starting point was OEM- in rear

people run OEM rears in front commonly, so again, shut the fuck up. z owners have been doing this since the Z33, if not back further than that across platforms

just because you are scared of your own fucking shadow in wheel fitment does not mean everyone else has to have shit fitment

 

[Exquisite_Red]

Guys, I really wanted to share this picture of my new OEM+ fitment. Thinking I didn’t go aggressive enough with the fronts. What do you think?

 

[OptionZero]

Guys, I really wanted to share this picture of my new OEM+ fitment. Thinking I didn’t go aggressive enough with the fronts. What do you think?

if you're equating whatever that is to a recommendation to move 19x10.5 +24 in front then you've proven my point. You dont know what wheel fitment is, so shut the fuck up and let the real ones talk

 

[Exquisite_Red]