Sponsored
Who.Am.Eye.2716
Well-Known Member
The v2 front bumper has an indent for the Z badge. No badge delete without molding the front bumper
The Z looks 1000x better than the Nissan Burger
The Z looks 1000x better than the Nissan Burger
AlanZ
Well-Known Member
- First Name
- Alan
- Joined
- Oct 28, 2023
- Threads
- 8
- Messages
- 526
- Reaction score
- 651
- Location
- Long Island
- Car(s)
- 2023 Performance 6MT Black Diamond/Graphite
- Occupation
- Civil Servant
I have the v1 bumper. Will the Z emblem work perfectly with my bumper?
Who.Am.Eye.2716
Well-Known Member
From what I have seen. Its a perfect replacement for the v1 bumper
Who.Am.Eye.2716
Well-Known Member
jc604
Well-Known Member
How easy was it to get off plus was there any heat gun needed or adhesive remover? Worried about my ppf
might vary car to car but I didnt need any heat gun or hair dryer at all. just sawed the tape off with dental floss. it kept fraying a bit but got it off before the roll ran out. no adhesive remover either just rolled it up with my thumb then took some glass cleaner and a towel and to it.
Who.Am.Eye.2716
Well-Known Member
What MCN1smo said.
Everything I do is optional and not needed. I use GooGone on adhesive. Then Isopropyl 91% to clean the surface. I use adhesive promotor for piece of mind.
only thing that took a minute was making sure I got the alignment right. that tape on the new emblem is so sticky that even if the edge touches it wants to stick so it took me longer second guessing myself putting the new emblem off than it did taking the old one off.
I took my nissan off a few days in advance as I thought it would be a pain but because the nissan logo has that hollow inside of the burger design the tape around the other ring is so skinny so once you saw through most of that you can just pop it off once its 3/4 done
I took my nissan off a few days in advance as I thought it would be a pain but because the nissan logo has that hollow inside of the burger design the tape around the other ring is so skinny so once you saw through most of that you can just pop it off once its 3/4 done