Search results

Well I also managed to stumble upon this too: https://midnightpetro.ca/mobil_1_advanced_fuel_economy_0W-30 I would say that the mobile 1 0w30 shears more like a thin 30wt than a 20wt. 20wt seem to shear around 2.6. Although the amsoil stuff shears at 3.07, so there is a small advantage to...

Where did you find this information that the mobile 1 stuff shears down to a 20wt?

I don't think it's warped because it does it intermittently. Actually, for the past 2 days, it has been smooth sailing :). I still need to fix the torn dust boots, but the brakes feel ok.

I haven't figured out exactly what is causing this yet, but I do see that my front brake calipers have torn rubber seal boots. Also the pads I ran at track have uneven wear from the top to the bottom as the bottom piston was activating more freely than the top piston. I think the oscillation...

Those BH SENS DO NOT work. Hopefully someone down the line can benefit from my sacrifice. We tried a clone, and a relearn. They failed to pick up at all. F. Will swap the OE TPMS once my current set of tires wear on through.

Hmmm, maybe amsoil will be my goto oil then. Do you know a 0w-30 that doesn't shear down by design?

How do you find the shearing information on an oil?

That's pretty dope, but that stuff is 16$ a bottle, whereas the mobile 1 stuff is 7$ a bottle. Idk if I feel like it's worth doing 96$ oil changes when I can do 42$ oil changes. Also, mobile 1 is already an incredibly reputable brand. I trust their stuff. Definitely not knocking AMSOIL and I'm...

I was looking at heavy weight alternatives to the stock 0w20 nissan recommends due to occasional track usage. I see some people use 5w30, and that is what I am using right now for track time. I recently stumbled upon a 0w30 that seems perfectly compatible to all of Nissan's requirements for oil...

I found the markings. They are located in the vents on the rotor. Kind of a PITA to look for. Anyways, the etchings indicate 30mm front min thickness and 18mm rear min thickness.

2024 Performance (So with the quad piston front brakes) No fender rolling required. Work Emotion ZR10 Front: 19x9.5 23ET Rear: 19x10.5 15ET Rear sticks out a smidge Front is perfect:

The performance ones. While they can't be rotated, that's A-OK. You can just replace the tire once it's bad per front/rear. Also, you *could* run 10mm spacers if you really wanted to be able to rotate them freely.

Oe wheels are great since it’s forged. no fender rolling :)

Looking to be able to swap wheels on/off for street/track use. I saw these on rockauto for 30$ a pop. Wanted to get these as they have a speed rating far above what the Z is capable. The issue is that a couple sites like autozone list them as incompatible with the car. How can they be...

Decided to run 275 square. I hope everything fits well :)

I want to run my OEM wheels on the track since they are forged. While shopping around, I saw the Dunlop Direzza ZIII on sale and would like to get a set of ultra high performance summers for the track on the cheap. The only issue is that there are only two sizes in 19s that are available...

This is a bit pedantic to say, but I do want to throw it out there. Technically speaking, pretty much every single gauge cluster made from the late 90s and forward are all digital. Analog gauge clusters haven't been a thing for a very long time. What has stuck around are digital gauges with a...

Fascinating. I had an issue a year ago or so where I just got into the car, drove around and noticed a huge lack of power. After I let the engine warm up, I full throttled in 3rd gear and got basically no torque. Looked at my boost gauge and the engine was refusing to built boost, yet my...

Work Wheels ZR10 Front: 19x9.5 23ET Rear: 19.10.5 15ET They have been proven to work, so yay :). Still haven't picked out tires. Probably just going to pick out whatever summer is cheapest on tire rack or discount tire.

I'd rather not run spacers. I've seen a few horror videos. I also decided to run a different flow formed wheel. It's a bit pricier, but I also liked them when I saw them :). Thanks for the suggestion though!