NISMO Z CARBO TECH BRAKE PADS now available to order on their website.

[SavedByFaith_]

Yes mate it's almost non existent, it's been an absolute nightmare to get pads for the Z Nismo and CarboTech USA and Australia are a joke of a company to get back to you.

Luckily Endless now finally have them for the Nismo in the MX72, MX72 Plus and CC-Rg compound.

Can you share the Part Number for the Endless front pads for the NISMO?
Thank you.

 

[Crownleyian]

Can you share the Part Number for the Endless front pads for the NISMO?
Thank you.

There you go mate, still haven’t installed them so not much I can say about either yet. I put up the CarboTech XP10 and Endless MX72 Plus, just in case someone is interested, the XP10 are more aggressive than the MX72 Plus, so I’ll start with the weaker ones for now.

Carbotech XP10
Temperature range: 250–1,650°F (121–898°C), peak friction coefficient ~0.60
Endless MX72 Plus
Rotor temperature range: 50–750°C, friction coefficient: 0.39–0.47

 

[SavedByFaith_]

There you go mate, still haven’t installed them so not much I can say about either yet. I put up the CarboTech XP10 and Endless MX72 Plus, just in case someone is interested, the XP10 are more aggressive than the MX72 Plus, so I’ll start with the weaker ones for now.

Carbotech XP10
Temperature range: 250–1,650°F (121–898°C), peak friction coefficient ~0.60
Endless MX72 Plus
Rotor temperature range: 50–750°C, friction coefficient: 0.39–0.47

Thank you!
Super curious how the endless are.

I'm about halfway through my OEM pad on the NISMO

Thinking of picking these up for the swap

 

[Thefunk]

I used xp10 and xp8 front and rear respectively they are amazing, especially for a novice track runner like me

 

[SavedByFaith_]

There you go mate, still haven’t installed them so not much I can say about either yet. I put up the CarboTech XP10 and Endless MX72 Plus, just in case someone is interested, the XP10 are more aggressive than the MX72 Plus, so I’ll start with the weaker ones for now.

Carbotech XP10
Temperature range: 250–1,650°F (121–898°C), peak friction coefficient ~0.60
Endless MX72 Plus
Rotor temperature range: 50–750°C, friction coefficient: 0.39–0.47

Brother
Where did you find the endless at? Having a hard time finding any vendors/retailers!

Thank you.

 

[Thefunk]

Does anyone else also think the MX72Plus box/label looks like a pack of guitar strings?

 

[FSUZ33]

Does anyone else also think the MX72Plus box/label looks like a pack of guitar strings?

 

[OptionZero]

Brother
Where did you find the endless at? Having a hard time finding any vendors/retailers!

Thank you.

If you need Endless pads you can contact them directly. I ordered the new MX87's for Z34 recently, haven't used them. still need to burn through the MX72's

Sales guy:
ENDLESS Brake Technology, inc.
Brandon Farrell
17222 Gothard Street, Suite D
Huntington Beach, CA 92647
Phone (714) 842-8551
[email protected]
www.endlessusa.com

$674 shipped for F/R

 

[FSUZ33]

Never bought from these guys, but Greenline Japan has full front/rear sets of multiple compounds, including MX72 for around $217 (only checked a few). Not all compounds are available for the NISMO front. MX72 available, but only rears of the MX72PLUS.

Assuming Greenline's legit, I also assume you're also talking increased shipping, tariff/duty, etc., so no clue what the out the door spend would be for a set from them.

Greenline's ENDLESS Brake Pad List for RZ34

ENDLESS MX72 for RZ34

 

[SavedByFaith_]

Never bought from these guys, but Greenline Japan has full front/rear sets of multiple compounds, including MX72 for around $217 (only checked a few). Not all compounds are available for the NISMO front. MX72 available, but only rears of the MX72PLUS.

Assuming Greenline's legit, I also assume you're also talking increased shipping, tariff/duty, etc., so no clue what the out the door spend would be for a set from them.

Greenline's ENDLESS Brake Pad List for RZ34

ENDLESS MX72 for RZ34

Thank you
I've seen green line before, never purchased anything

I'd imagine the OTD cost is less overall, so I may inquire and see

Although, looking for mx72 plus, if they don't have fronts, that'll be a tough.

 

[OptionZero]

wierd how the MX87 is basically not listed anywhere

 

[Crownleyian]

Brother
Where did you find the endless at? Having a hard time finding any vendors/retailers!

Thank you.

Australian Endless importer got them for me, that's why I was so skeptical with them as well, as I couldn't find anything about these pads online, find your local Endless importer and they should be able to find them in their system.

 

[Crownleyian]

wierd how the MX87 is basically not listed anywhere

From the information my importer gave me, the front pads where manufactured in March for the Z Nismo RZ34 so it's a new product.

 

[Crownleyian]

Guys just on a side note Endless now also have front rotors for the Z Nismo Rz34, they are lighter than the stock ones.

 

[OptionZero]

Australian Endless importer got them for me, that's why I was so skeptical with them as well, as I couldn't find anything about these pads online, find your local Endless importer and they should be able to find them in their system.

i have a 370z, and bought a set from Endlesss USA thru the guy i posted

just remarking why it isnt widely available