Nismo LM-RS1 Wheels

[pbm457]

The dealership is having a hard time getting the left rear to bead. I’ll post better pictures when it’s done.

 

[Vintage]

The dealership is having a hard time getting the left rear to bead. I’ll post better pictures when it’s done

NICE !! Looking forward to seeing it sit on all fours. Are those The Black or Anthracite wheels ?

 

[pbm457]

NICE !! Looking forward to seeing it sit on all fours. Are those The Black or Anthracite wheels ?

Thank you. They are black.

 

[Vintage]

Thank you. They are black.

I really like the stance with the + 12 on all fours. I'm starting to second guess my decision with + 22 for the fronts, thinking about exchanging for +12. Any pics looking down the side from the front. Your opinion greatly appreciated.

 

[pbm457]

I really like the stance with the + 12 on all fours. I'm starting to second guess my decision with + 22 for the fronts, thinking about exchanging for +12. Any pics looking down the side from the front. Your opinion greatly appreciated.

 

[pbm457]

As you can see, there is a little poke. I hope the coilovers will take care of that when they are installed. I went with +12 offset because that’s what was on the display Nismo parts Z.

 

[Vintage]

Thanks for the pics. Much appreciated.
How's the ride with tires? I was thinking Michelin's, but those Dunlops look Sweet.

 

[pbm457]

You’re welcome. They are almost as sticky as Michelin cup 2’s just normal driving. They pick up a lot of road debris. I’ll keep you posted.

 

[Vintage]

You’re welcome. They are almost as sticky as Michelin cup 2’s just normal driving. They pick up a lot of road debris. I’ll keep you posted.

On rim width, did you do 9.5 on front and 10.5 on rear or 10.5 on all four ?

 

[pbm457]

On rim width, did you do 9.5 on front and 10.5 on rear or 10.5 on all four ?

9.5 front, and 10.5 rear..

 

[Vintage]

Lug Nuts finally arrived.
Nismo Rims mounted on factory rubber. Pretty happy how it turned out.
I might go to 285/35 or
295/35 for rears (when it's time for new rubber)
I believe the 255/40 works good on the front

 

[MCN1SMO]

looking good!

 

[pbm457]

You’re car looks great!

 

[Mr. Mac]

@Vintage – Hey David, I know you wound up trading up to NISMO since this thread was posted, but would mind sharing what you finally settled on with your LM-RS1 wheels as far as widths and offsets for front and rear, and if the combo you went with had provided you with a flush fitment. I'm considering a set of LM-RS1 wheels for my NISMO and am trying to figure out correct combo. Thanks in advance for any intel you can provide.

According to NISMO website, LM-RS1 wheels are available in the following specs:

19" x 9.5" / 12mm
19" x 9.5" / 22mm
19" x 9.5" / 30mm

19" x 10.5" / 12mm
19" x 10.5" / 22mm

 

[JoeSTi]

Thank you. They are black.

What lug nuts did you go with? Set up looks real good.