Hands Up all the Aussies

[loudsx]

OK this is weird

JN1GBAZ34A0220288 is the highest VIN I can find registered in Vicroads
complied in 05/2024

but JN1GBAZ34A0220281 which is 7 lower was complied in 09/2024 and registered 2 days ago.

 

[Beard]

Maybe this one: https://flowbrackets.com.au/products/vic-nsw-qld-tas-usa-plate-number-plate-bracket

A similar bracket and the 3D printed mounts in my signature below allowed me to mount mine to the side.

 

[bpeckham]

A similar bracket and the 3D printed mounts in my signature below allowed me to mount mine to the side.

I'm looking for a low profile center mount. Maybe not possible with the Z.

 

[Beard]

I'm looking for a low profile center mount. Maybe not possible with the Z.

You can just cut up the original, slice it down to just the mounting points. @Mud has done similar

 

[Mud]

You can just cut up the original, slice it down to just the mounting points. @Mud has done similar

@bpeckham

Here's the how to

https://www.nissanzclub.com/forum/t...-hack-to-fit-slimline-plates.2242/#post-66280

 

[bpeckham]

@bpeckham

Here's the how to

https://www.nissanzclub.com/forum/t...-hack-to-fit-slimline-plates.2242/#post-66280

Huh. Autobarn link "blocked by security service."

 

[Mud]

Huh. Autobarn link "blocked by security service."

Search "Kingpin backing plate"

 

[Resnort]

G'day guys and gals.
SEQ here, Brissy northside. Picked up my Proto in October (village motor Northlakes had one as a demonstrator with 34km on the clock). Very happy so far, but they really do need an exhaust.

Only "Mods" i have done is the flow bracket kit. Not cheap, but very nicely made
https://flowbrackets.com.au/products/nissan-400z-number-plate-holder-plinth-front

Some custom plates....(which I've ordered twice because I assumed a normal size plate would fit on the back well.....it doesn't, so now it's dual slim line)

And some cheesy floor mats on Black friday sales from FITMYCAR so I don't trash the factory ones

The Z is an absolute Behemoth compared to an MX5

 

[loudsx]

G'day guys and gals.
SEQ here, Brissy northside. Picked up my Proto in October (village motor Northlakes had one as a demonstrator with 34km on the clock). Very happy so far, but they really do need an exhaust.

Only "Mods" i have done is the flow bracket kit. Not cheap, but very nicely made
https://flowbrackets.com.au/products/nissan-400z-number-plate-holder-plinth-front

Some custom plates....(which I've ordered twice because I assumed a normal size plate would fit on the back well.....it doesn't, so now it's dual slim line)

And some cheesy floor mats on Black friday sales from FITMYCAR so I don't trash the factory ones

The Z is an absolute Behemoth compared to an MX5

What was your thoughts on the mats.

I got some but not super impressed so not installed.

Similar to you flow brackets
Custom plates

Plus a few nismo goodies and TE37

 

[MattJ2020]

Was it just the Plinth Delete Kit (FRONT) you bought or the delete kit with brackets?

 

[Resnort]

What was your thoughts on the mats.

I got some but not super impressed so not installed.

Similar to you flow brackets
Custom plates

Plus a few nismo goodies and TE37

They're not as bright as I was hoping, but overall shape they are better than factory fit. And really they are sacrificial.

 

[Resnort]

Was it just the Plinth Delete Kit (FRONT) you bought or the delete kit with brackets?

Well.... They don't sell the delete kit without a numberplate bracket. Which I found a bit rude, as there are other cheaper bracket options out there.

 

[loudsx]

I bought just the delete kit

but prob getting the bracket as the autobarn one I got is way to flimsy and mounting direct is a little lower than I would like

https://flowbrackets.com.au/products/nissan-400z-number-plate-holder-plinth-front

 

[Resnort]

I bought just the delete kit

but prob getting the bracket as the autobarn one I got is way to flimsy and mounting direct is a little lower than I would like

https://flowbrackets.com.au/products/nissan-400z-number-plate-holder-plinth-front

I tried but got this message when i clicked next.

There are cheaper options for the bracket, like theplatebracket.com.au

 

[MattJ2020]

I tried but got this message when i clicked next.

There are cheaper options for the bracket, like theplatebracket.com.au

Can you just buy this and put a plate on?