Coilovers and Supporting Mods

[Hernandooo]

I've got a set of BC Racing DS true coilovers on their way. Plan is to pair them up with stanceparts Aircups. Now, i want to get this all done the first time.

What other parts do I need for supporting mods. I'm already tracking Camber Arms, Toe Arms, and Castor arms from SPL.

Is there anything else i'm missing? and recommendations

 

[Mr&Mrs]

I would get Z1 sway bars while at it and rear diff brace. Depending on budget get subframe collars and bushings. Some people say subframe bracing isn't needed but I say if doing all the suspension you may as well do the chassis support with it. Also keep in mind doing all this will make it less daily driver friendly.

 

[Hernandooo]

I would get Z1 sway bars while at it and rear diff brace. Depending on budget get subframe collars and bushings. Some people say subframe bracing isn't needed but I say if doing all the suspension you may as well do the chassis support with it. Also keep in mind doing all this will make it less daily driver friendly.

I intend to have the Z as a track/ weekend car. Barely get to the drive the beaut anyways . I was looking at sway bars & strut bars too

 

[Mr&Mrs]

I intend to have the Z as a track/ weekend car. Barely get to the drive the beaut anyways . I was looking at sway bars & strut bars too

Unless you want a lighter bar or 3 point bar the factory one is fine. If you go with a 3 point bar you have to cut your windshield wiper plastic to mount to the studs underneath.

 

[kappa_md]

Coilovers (Good ones)
Front and Rear sway bars
Front and Rear subframe brace
Z1 subframe bushing collars
Camber and Toe arms
Suspension Geometry

 

[goeagles11]

Never heard of the air cups. They look pretty cool.