breezyrc15
Member
- Thread starter
- #1
Taking delivery of a used '24 black diamond nismo z and I'm looking forward to sharing the build.
The mods on the car already include a SOHO custom 3" exhaust, Boosted 6 full downpipes with high flow cats, GoRaceBox off the shelf tune, and AMS 80mm intakes.
I have ordered the following parts, and will be looking to focus the build on being daily drivable, 93 octane fueled, properly stanced, and set up to go fast around corners rather than just in a straight line.
I've done research on the forum (thank you to all who have documented your mods & builds), and I'm hoping to give back wisdom as well. The car has 4k miles on it. By the time it hits 25k miles, I will be switching to coilovers, forged adjustable front upper control arms from Z1, and will be adding more suspension components like solid bushings and braces.
As a side note, I run the Unlockable Character YouTube, and I cannot wait to create videos on the Z. I'm sure we will see many more enthusiasts start to understand how special the car is as time goes by.
The mods on the car already include a SOHO custom 3" exhaust, Boosted 6 full downpipes with high flow cats, GoRaceBox off the shelf tune, and AMS 80mm intakes.
I have ordered the following parts, and will be looking to focus the build on being daily drivable, 93 octane fueled, properly stanced, and set up to go fast around corners rather than just in a straight line.
| Z1 Oil Pan + Magnetic Drain Plug |
| Z1 Nismo Under Shroud |
| ADD W1 V3.3 Catch Can Kit |
| Z1 Rear Camber Bolts |
| Z1 Offset Eccentric Toe Bolts |
| Nissan Oversized Oil Filter + Motul 5w30 Oil |
| Z1 20mm Hubcentric Spacers & Extended Studs |
| Z1 Rear Camber & Traction Arms |
| SPL Front Outer Tie Rods |
| Oil Pressure Solenoid Delete Plate |
| Eibach Pro Lowering Springs |
I've done research on the forum (thank you to all who have documented your mods & builds), and I'm hoping to give back wisdom as well. The car has 4k miles on it. By the time it hits 25k miles, I will be switching to coilovers, forged adjustable front upper control arms from Z1, and will be adding more suspension components like solid bushings and braces.
As a side note, I run the Unlockable Character YouTube, and I cannot wait to create videos on the Z. I'm sure we will see many more enthusiasts start to understand how special the car is as time goes by.