Advise on New Shoes for my 24 Nismo!

[OptionZero]

Thanks for the info. I've checked that website before. Sadly for LM, in our bolt pattern, there are not many choices. I might just go with the set I mentioned. See how the fitment goes and adjust. Just consider it as an experiment for other people on the same platform.

do not buy that set with the +38 or whatever fronts
you are flushing money away. it is WAY more sunken than the rears

buy the rears and order the fronts if they'll let you

just be patient and wait for the right specs to come in instead of rushing to make a bad purchase

 

[Suzuyabot]

do not buy that set with the +38 or whatever fronts
you are flushing money away. it is WAY more sunken than the rears

buy the rears and order the fronts if they'll let you

just be patient and wait for the right specs to come in instead of rushing to make a bad purchase

Not gonna do the +38 one. I'm talking about the 10 +30 front and 11 +10 set.

 

[OptionZero]

closer, but the rears are still more aggressive than the fronts, so i suspect you'll be looking at a spacer to make it look good

 

[Suzuyabot]

closer, but the rears are still more aggressive than the fronts, so i suspect you'll be looking at a spacer to make it look good

It might be. Just what I was concerned about is whether the rear could even fit in. Front looks absolutely fit in without being too aggressive.

 

[OptionZero]

It might be. Just what I was concerned about is whether the rear could even fit in. Front looks absolutely fit in without being too aggressive.

Pictured:
20x12, +20 rear
315/25/20

20x11, +10 sits 3mm further INWARD.

You'll be fine.

 

[Suzuyabot]

Pictured:
20x12, +20 rear
315/25/20

20x11, +10 sits 3mm further INWARD.

You'll be fine.

Thanks for the info. And your setup is cool as f!

 

[OptionZero]

Thanks for the info. And your setup is cool as f!

thx

thats at around -3 camber btw
over a finger gap, which can be taken out with more playing around or a 325 tire