Sponsored

Oil change feedback

RobotAZ

Well-Known Member
First Name
Rob
Joined
Mar 16, 2025
Threads
16
Messages
353
Reaction score
366
Location
WKY
Car(s)
2024 Z Sport two-tone Everest White 9AT
Occupation
Natural Gas Consultant
I used the OEM oil filter which is 15208-65F1B which can also end in “E” supposedly and be following spec.

I also used High Performance Lubricants’ top end of 3 levels of 0W-20 quality oil. Even their 1st level is overkill for 7,500 mile or less intervals, but hey we are car freaks and better is better.

Feedback is that valve train noise is less than whatever the dealer was using, and oil pressure (probably due to using he correct filter) is in the 22-25 PSI level at idle instead of 17-20 and usually 19.

IMG_2460.webp


IMG_2459.webp
 

trackratZ

Well-Known Member
First Name
August
Joined
Mar 23, 2021
Threads
104
Messages
2,854
Reaction score
5,486
Location
So CA
Car(s)
25 Z Perf 6MT, Cayman S (track), MX5 Club (autox)
Occupation
Software security
Feedback is that valve train noise is less than whatever the dealer was using, and oil pressure (probably due to using he correct filter) is in the 22-25 PSI level at idle instead of 17-20 and usually 19.
OEM filter is always the best. How many miles on your oil change and was the original filter not OEM? Big difference on the idle PSI. I'm not close to my first change yet.
 
OP
OP
RobotAZ

RobotAZ

Well-Known Member
First Name
Rob
Joined
Mar 16, 2025
Threads
16
Messages
353
Reaction score
366
Location
WKY
Car(s)
2024 Z Sport two-tone Everest White 9AT
Occupation
Natural Gas Consultant
OEM filter is always the best. How many miles on your oil change and was the original filter not OEM? Big difference on the idle PSI. I'm not close to my first change yet.
Filter was OEM but not the correct filter. Most people apparently use the wrong filter. I don’t know why and don’t care. It’s a pointless battle to fight.
 

NocturnalEmber

Well-Known Member
Joined
Sep 15, 2024
Threads
13
Messages
299
Reaction score
265
Location
East coast
Car(s)
24 Z Performance
Oil filters can be serious business.

In the rotary world that I come from, there was an issue discovered with aftermarket oil filters for the Series II RX-8's where they didn't have the proper drainback valve that the oem's themselves had (apparently the revision didn't carry over to the aftermarket and they still retained the Series I's design for Series II engines.) So one could have an oil filter from a 3rd party for a 2009 model, but it would internally be the same design as an 04-08 model. OEM or bust in that case.

Unrelated detail, I know, but it goes to show that it doesn't hurt to screen the parts you get.

I'm unfamiliar with Nissans part numbers, but if I had to guess, the 'B' and 'E' designation are likely a supersession or a revision denoted by the later letter.
 

trackratZ

Well-Known Member
First Name
August
Joined
Mar 23, 2021
Threads
104
Messages
2,854
Reaction score
5,486
Location
So CA
Car(s)
25 Z Perf 6MT, Cayman S (track), MX5 Club (autox)
Occupation
Software security
Filter was OEM but not the correct filter. Most people apparently use the wrong filter. I don’t know why and don’t care. It’s a pointless battle to fight.
Trying to understand, was the wrong filter installed by Nissan as OEM as delivered? Or was it from a prior oil change? Nissan should not have used the wrong filter to begin with.

I'm at 600+ miles and planning an oil change soon after 1K miles, even though dealer set me up for the 5K mile appointment.
 

phil_chronicles

Well-Known Member
First Name
Phil
Joined
Feb 16, 2024
Threads
36
Messages
830
Reaction score
952
Location
WA State
Car(s)
Z
Filter was OEM but not the correct filter. Most people apparently use the wrong filter. I don’t know why and don’t care. It’s a pointless battle to fight.
Within the last 2 yrs the OEM filter part number has changed, something like 5 times. Are you sure the wrong filter was installed, or was it the correct one at the time prior to the change? 🤔
 

Zstevo

Member
First Name
Stephen
Joined
Feb 29, 2024
Threads
0
Messages
8
Reaction score
2
Location
Australia
Car(s)
Nismo Z
Occupation
Plumber
The oil filter shouldn’t change the pressure. It should only change if the filter is blocked and oil passes through the relief valve…
 
 






Top