Sponsored

NISMO Low-Glare/Wide-Angle Mirrors

FatRatZ

Well-Known Member
Joined
Nov 3, 2025
Threads
1
Messages
68
Reaction score
102
Location
PA
Car(s)
2024 Heritage Z, 26 Infiniti QX60, 27 Infiniti QX80, 15 Infiniti Q50 and others
I installed them as well - a bit pricey but I have trouble seeing in the blind spot when at intersections and merges since my back is bolted together with rods.
these fixed the problem with the wide angle view - don’t need to turn my head as I can see with the mirror now - love them and the blue color is cool.
 

Meg_Z

Well-Known Member
Joined
Apr 27, 2025
Threads
3
Messages
196
Reaction score
219
Location
Oklahoma
Car(s)
Z Performance
Occupation
Military
I installed them as well - a bit pricey but I have trouble seeing in the blind spot when at intersections and merges since my back is bolted together with rods.
these fixed the problem with the wide angle view - don’t need to turn my head as I can see with the mirror now - love them and the blue color is cool.
How much were they? Thanks.
 

FatRatZ

Well-Known Member
Joined
Nov 3, 2025
Threads
1
Messages
68
Reaction score
102
Location
PA
Car(s)
2024 Heritage Z, 26 Infiniti QX60, 27 Infiniti QX80, 15 Infiniti Q50 and others
Around $225. And you have to use 3M tape to build a curved adhesive point as the Nismo mirrors are flat glass, and they have a habit of falling off since the factory mirrors are not flat. So when you stick the Nismo mirror on your original mirror, especially the passenger side, which has concavity to it, you need to make sure you get a good surface. I built it up with some 3M tape to ensure a solid mount.
 

Meg_Z

Well-Known Member
Joined
Apr 27, 2025
Threads
3
Messages
196
Reaction score
219
Location
Oklahoma
Car(s)
Z Performance
Occupation
Military
Around $225. And you have to use 3M tape to build a curved adhesive point as the Nismo mirrors are flat glass, and they have a habit of falling off since the factory mirrors are not flat. So when you stick the Nismo mirror on your original mirror, especially the passenger side, which has concavity to it, you need to make sure you get a good surface. I built it up with some 3M tape to ensure a solid mount.
Thank you!
 
 






Top