Yes. The latest Z1 design, Voodoo13, and GKtech i believe all technically allow adjustment on car, but they all use a generic jam nut design.
SPL costs more because they use a "double adjuster" with a hex cap, that multiple alignment techs have told me are much easier to use, and allows for...
They do stock and order OEM stuff, and they sometimes have sales on other companies things, so they still have use
but anything with their brand should be suspect
They are very aggressive with their social media advertising, with frequent videos, emails, and twitter/instragram stuff
As a big name, they also are very visible working with other companies, including Nissan, which gives them the appearance of quality.
Of course, those who have been in the...
No rubbing in rear. As I said, there is a chasm, you can fit two fingers.
Had some rubbing on the front bumper tab in front
Trimmed/relocated the tab
No more rubbing
Running an even more aggressive set up now
19x10, -3
245/40/19
19x11, -6
275/35/19
Front fender is pulled
Camber makes a...
fronts will poke without camber
And
aftermarket wheels on stock height looks dumb
nismo or not you have no front alignment adjustment and minimal rear
do it right
Coils
Arms
Alignment
No experience with them personally
but they are one shop, compared to Ohlins Japan being a manufacturer
and also “current events” might be wrecking havoc on parts logistics
either way, hope they come thru for you soon
now this is pretty cool
assuming the price is competitive with Stanceparts I see little reason to get any other coil over setup. It’s customizable, serviceable stateside, and based on Ohlins
heck, if you’re in Califoria you could just drive there and have them install it
for Z-specific...
275/40/18 is 26.7 inches which is close to stock
I paid $164/ea from Tire Rack.
Unfortunately this tire was discontinued, and I don't know if there's a comparable value anymore in the 200TW category.
Tire pricing can get wierd
for example, the Yokohama A052 is regarded as a fast wearing...
been a little bit since i dug through the pricing but there also seemed to be a noticeable jump in tire prices going from 18 to 19
its just more economical to run 18s at the track, in addition to having alot of selection available
Stanceparts air cups are universal, but you need to tell them the shaft diameter. They install below the upper mount, above the spring, with shaft running through it. The diameter is necessary to properly size the opening to ensure an tight fit.
Since Sakebomb is building them, they can let...
haven't done any measurements but sure seems like they're the same based on fitments floating out there. any minor differences can be accounted for in alignment
also, yes, you can fit 20x12 in the rear
20x12, +20
315/25/20
-2 camber
This is where my fitment actually could have been...
9.5 up front is likely down to most retailers recommending a stagger by default and to be conservative with most customers being ignorant about wheel fitment
also unless the shop is familiar either with aggressive fitment generally or Z fitment specifically they won't know for sure how to...
Actually, fits pretty comfortably with my pulled fender and -3.5 camber, 245/40 tire (Falken FK510)
Please excuse the dirty car, this was on pickup from the shop
No rub lock to lock, no on any form of freeway or street driving
I have air cups so speed bumps and curbs are not an issue even with...
Not sure about the RZ34 but I dumped my flares early on and found that the Z34 front fenders were already a bit rolled from the factory on my Nismo. I don't think you need to touch your fenders to clear those wheels, but if you do its not that hard to find a competent tech these days.
On an 11...