Those sizes are fine
The issue is the Nismo flares DO NOT INCREASE WHEEL CLEARANCE. Look at how they clip in, they extend inward a bit and may rub. They actually reduce clearance (slightly).
It is not accurate to call them flares because they don't actually flare. They're "trim"
That said...
Not even close. OEM springs are 4-5 diameter. You can chuck in in the box for if you ever wanna go back to stock
If you upgrade you'll want to get all the arms at once
I found an old pic to demonstrate what I was talking about regarding the effect of their new design
This is my rear air cup setup at an intermediate stage:
Stanceparts Air Cup, mounted over a Swift 6 inch, 10kg spring, on an SPL Midlink v2
The lip of that spring bucket is raised, ostensibly...
ATTENTION:
I have been referencing 60MM ID springs for the new SPL Mid-links but something was bugging me in the back of my head, so I had to check my old receipts
SPL V2 design uses 65MM ID springs. This is the design of the Nismo versions so it applies to them as well.
SPL v3 design uses...
this is somewhat correct
But we should distinguosh between “rebranded” and “manufactured by”
Nismo Clubsport wheels were Gram Lights 57CR wheels made by Rays, bwith a Nismo logo engraved in them
Nismo LMGT4 is made by Rays but not a rebranded version of an existing product.
even rr brand...
Short answer: no, i don’t think there are caps for that style
long answer:
I did some digging, and the Nismo lug nuts are rebranded Muteki HR38 lug nuts
You can see them here, the design is identical down to the encircling the lip...
Two piece lug nuts are a good investment to avoid damaging your wheels
R40 Iconix are some of the best lugnuts you can get. Free spinning base allows the nut to be tightened without scatching the surface, and the color insert can be swapped out for replacements or alternate colors.
The...
I have the V2. On that design, I ran into a HYPER specific problem:
I installed air cups in the rear that go over the rear springs. The raised lip of the perch could, on compression, hit the air cup because I switched to a 4 inch spring with short travel to make up for the thickness of the...
Not sure who was saying that replacement rings are cheaper than single piece
was the context comparing two piece rotors to carbon ceramics? Because that makes more sense
For use with the SPL mid link it is 60mm inner diameter. I misspoke earlier and wrote outter diameter.
Check:
https://www.splparts.com/products/370z-g37-rear-mid-links.html
For use with OEM buckets, i dunno, theyre huge. For example i found an old pic of the springs for my Aragostas