Sponsored

Search results

  1. Ohlins Coilover Setup

    yeah that was for you and yes, the cups go on the coils off the card, because they go below the top mount, above the coils
  2. Ohlins Coilover Setup

    wait, why so little front camber? Thats the Z's weakness, front grip
  3. Ohlins Coilover Setup

    Do you know which shop is installing it for you? Even if you aren't ready to install, talk to them about how you're going to set up your switches. I don't know whether you have any blank slots in the center console, but thats the obvious place if its free Otherwise, pick a spot, figure out...
  4. Ohlins Coilover Setup

    Ample clearance
  5. NISMO Mechanical LSD for RZ34 MT/AT (all models)

    Thanks for finding this six plates gives us a comparison point to other options OS Giken, for example, advertises their units can fit "up to" 28 plates...
  6. NISMO Mechanical LSD for RZ34 MT/AT (all models)

    a clutch type LSD should lock harder than stock and also, in theory, rebuildable to lock 1/1.5/2 way and also different levels of lockup
  7. NISMO Mechanical LSD for RZ34 MT/AT (all models)

    Both Z1 and Alaria Tech have diff coolers for about $1K for the Z34. Is there any reason they won't fit a diff for an RZ34? The only thing missing is a temp sensor that is wired to activate it when you want, instead of having it on all the time or having to turn on/off manually, but i don't...
  8. NISMO Mechanical LSD for RZ34 MT/AT (all models)

    They should bring an affordable diff cooler over as well. I know Nismo made one but its . . . Nismo priced
  9. Has anyone replaced the seats?

    Do not buy a seat without trying it first and you may need an FIA certified one to pass safety inspection on a track I can tell you Brides are for . . . JDM sized drivers
  10. Has anyone replaced the seats?

    you need a resistor i vaguely remember it needing to be 2.2 ohms but i dont remember where i got that from
  11. Ohlins Coilover Setup

    if you have a good feeling for whoever you talk to maybe ask for a discount esp since you are likely the first RZ34 with air cups Its sort promotional work for them if you end up posting about them whenever you get them also curious if the delay is parts from Ohlins (usa branch in north...
  12. Nismo Z Track Impressions (3 Events)

    i dont know what, if anything Nissan changed from Z34 to RZ34 on my Z34, i consulted CJ motoring. He previously made a surge tank solution but it waa discontinued. He said the Radium one looks pretty good, but its about $1k CJ has more exotic solutions which involving more stuff, but they...
  13. RZ34 as a track car, what's needed?

    same chassis with a few hundred pounds more weight and a turbo engine, so the formula is the same, you just need a ton more cooling on everything The main difference is you have more options now, since the market has embraced more track-oriented options Ohlins and Nitron make coilovers for us...
  14. Which Brake Pads for speeds 130MPH+ ?

    if you are traveling regularly at 130 mph on the street, don't bother upgrading the brakes, let nature solve the problem for us. Hopefully, stopping will be an issue only once. If you actually are on a track and need to stop from 130 mph repeatedly, you'll throw your stock brakes and Z1...
  15. Bent Rear Knuckle

    why bother doing one arm at a time get the car up once and replace everything
  16. Ohlins Coilover Setup

    i'm at work or i'd do this myself try calling Feal and asking if they know Feal Suspension 3496 Highway 2 #282 Wrightwood, CA 92397 United States of America 909-930-1300 they make true types for Z34
  17. Bent Rear Knuckle

    the parts will fit however: 1) Used parts can be a crapshoot, depending on your source. Just the nature of the biz. 2) Swapping the arms is just bolting/unbolting; however swapping bushings requires a press. None of this is overly difficult, any shop can do it, it's just . . . gonna cost...
  18. BBS LM on Z Nismo

    you made a broad, ignorant about about other car owners so you should live with how stupid you sound Your Z comes with a fake noise generator FROM THE FACTORY did you buy a heritage bumper because it was super functional? Does it add 50hp? Some people are doing it different than you some...
  19. BBS LM on Z Nismo

    this sounds so much like an old man bitching about what kids wear these days are you saying rolling or pulling fenders is “stance bro”? Guess what, some Nismos (2015+) have fenders rolled from the factory. Oh, and the Nismo trim things REDUCE clearance, does removing them count as “body...



Top