Wheel and tire fitment help

[Apple-Saucer]

Been doing a bit of research and from what I can gather is I would have no issue with my intended setup.

I don't intend to track or lower my 24 perf. Z. Tire I'd go with is Michellen PS4.

I know the center bore is 1mm larger than stock but it seems like it should be negligible? Any advice, or possible fitment issues?

 

[toki]

No fitment issues expected with what you posted, you'll be slightly under flush which should look fine at stock ride height.

I will also say that those Apex wheels look like a fine choice for a forged wheel, but if that is the price you're paying + tax and shipping you are definitely in the custom 3-piece (SSR, Work, etc) price range if you order directly from Japan. I tell everyone who will listen about Nengun.com for ordering Japanese wheels. Wheels that US retailers often sell for $4500-5000 a set end up being about $3500 even with the very expensive shipping from Japan.

 

[Michael C.]

You could get 67.1 to 66.1 hub-centric rings from Amazon.

https://www.amazon.com/WHEEL-CONNECT-Centric-Aluminium-Hubring/dp/B08MDHF478?th=1

 

[Apple-Saucer]

No fitment issues expected with what you posted, you'll be slightly under flush which should look fine at stock ride height.

I will also say that those Apex wheels look like a fine choice for a forged wheel, but if that is the price you're paying + tax and shipping you are definitely in the custom 3-piece (SSR, Work, etc) price range if you order directly from Japan. I tell everyone who will listen about Nengun.com for ordering Japanese wheels. Wheels that US retailers often sell for $4500-5000 a set end up being about $3500 even with the very expensive shipping from Japan.

I'll definitely check out the site, appreciate it.