SRS error after changing clock spring

[gh9886]

Hey all,

I recently changed the clock spring on my '07 HR 350z, due to the horn no longer working. Since doing so, the airbag light has started flashing. The flash pattern I'm getting is 1 long followed by 1 short. A scan with NDS II revealed the following error code: b1081, pre-ten front rh.

No accidents or malfunctions were witnessed, and airbags have not deployed during the car's lifetime. I can't clear the error with NDS II. Unsure if this is a common issue, or if I'll need to replace the SRS module? Anyone have experience or knowledge on the issue?

Thanks in advance!

 

[JAKESZ]

Did you try asking on my350z.com?

 

[pectab]

Hey all,

I recently changed the clock spring on my '07 HR 350z, due to the horn no longer working. Since doing so, the airbag light has started flashing. The flash pattern I'm getting is 1 long followed by 1 short. A scan with NDS II revealed the following error code: b1081, pre-ten front rh.

No accidents or malfunctions were witnessed, and airbags have not deployed during the car's lifetime. I can't clear the error with NDS II. Unsure if this is a common issue, or if I'll need to replace the SRS module? Anyone have experience or knowledge on the issue?

Thanks in advance!

Are you using after market clock spring? This is known issue on the cheap Chinese clock springs. I had same issue fixed by buying OEM and clearing error codes.