Sponsored

Boosted 6 Auto Shorty/Velocity-Stack intake

staying_tuned

Well-Known Member
First Name
Mike
Joined
Feb 9, 2025
Threads
14
Messages
163
Reaction score
196
Location
Kentucky
Car(s)
23’ Z Performance Manual
I've been leaning towards the AMS intake, Concept Z has it down to $472 now but I just learned of Boosted 6's offering. I dig the open-air elements and haven't run into heat-soak issues in the past with them but I haven't heard of anyone running their intake and figured I'd ask if anyone else has. I know RAE does some incredible work but that's a bit too much $ on an intake for my goals and budget. Boosted 6 auto's looks near identical minus the Ti and alien-tech welds. It also includes a spacer so no tune/re-tune needed for a reasonable $399.

Thoughts?

https://boosted6auto.com/products/boosted-6-auto-3-modular-shorties

Audio: https://www.instagram.com/boosted6auto/reel/DENPJ4hue-1/

@Racebox I found you also carry their gear, do you have the Neo Chrome V2 with the silicon base kit in stock? Boosted 6 shows on back-order but figured I'd ask in case you have some Neo V2s squirreled away!
 

Hernandooo

Well-Known Member
First Name
Hernan
Joined
Mar 4, 2024
Threads
11
Messages
335
Reaction score
452
Location
Straya
Car(s)
2024 Nissan Z, Trek Bicycle
I've heard from my tuner, when he had someone bring in their Z with boosted 6 intakes, he saw a massive influx of intakes temperature rising vs the ams which had none.

I think that would be the only con
 
OP
OP
staying_tuned

staying_tuned

Well-Known Member
First Name
Mike
Joined
Feb 9, 2025
Threads
14
Messages
163
Reaction score
196
Location
Kentucky
Car(s)
23’ Z Performance Manual
I've heard from my tuner, when he had someone bring in their Z with boosted 6 intakes, he saw a massive influx of intakes temperature rising vs the ams which had none.

I think that would be the only con
Gotcha, thanks for the quick response. It turns out their Z RAM ducting is available as well despite the site saying pre-order. I wonder if that is in response to what you've heard although the only times I've noticed similar fluctuations is while sitting on the dyno.
 

Mugzilla

Well-Known Member
First Name
Matt
Joined
Apr 4, 2024
Threads
68
Messages
629
Reaction score
704
Location
Short Hills, NJ
Car(s)
2024 Z Sport (MT)
Occupation
printer repair man
I was about to pull the trigger on the AMS. BUT, autozone has the K&N down to $399 right now.

Pulled the trigger.
 

Hernandooo

Well-Known Member
First Name
Hernan
Joined
Mar 4, 2024
Threads
11
Messages
335
Reaction score
452
Location
Straya
Car(s)
2024 Nissan Z, Trek Bicycle
I was about to pull the trigger on the AMS. BUT, autozone has the K&N down to $399 right now.

Pulled the trigger.
The thing that put me off on the K&N is the oil from the filter getting sucked in, possibly causing the MAF sensor to cause a CEL. Plus, the QC on their filters are not that great, before installing, check for loose threads, this can cause catastrophic damage to your turbos

IMHO dry > wet filters
 

Mugzilla

Well-Known Member
First Name
Matt
Joined
Apr 4, 2024
Threads
68
Messages
629
Reaction score
704
Location
Short Hills, NJ
Car(s)
2024 Z Sport (MT)
Occupation
printer repair man
The thing that put me off on the K&N is the oil from the filter getting sucked in, possibly causing the MAF sensor to cause a CEL. Plus, the QC on their filters are not that great, before installing, check for loose threads, this can cause catastrophic damage to your turbos

IMHO dry > wet filters
I'll do a thorough inspection. I appreciate the insight.
 
 






Top