2024 Nissan Z NISMO Build

[tokie]

Posting my build to share with whoever might be interested.

I am more of a lurker on these forums so this list basically mirrors a lot of other builds.

• AMS Flex Fuel Kit
• AMS Injectors (Stage 1)
• AMS High Pressure Fuel Sensor
• AMS HPFP (Stage 1)
• AMS Downpipes
• Mishimoto Intake
• Mishimoto Catch Can
• Z1 Exhaust
• BC Racing Coilovers (true style)
• Z1 Adjustable Suspension Kit
• Z1 Undershroud
• Z1 Transmission Pan Shield
• Z1 Rear Diff Brace
• Z1 Sway Bar Set
• Z1 Adjustable End links (front and rear)
• Z1 Rear Subframe Tie Bar
• Z1 Front Subframe Chassis Brace

The tune was done by AMS via Jotech and all fuel related parts were installed by Jotech

For anyone who has done these downpipes, I am sure you feel my pain.

 

[Bumflik]

Awesome results! I have similar build. Upgraded twin disc clutch kit lightweight aluminum fly wheel 3" Track exhaust Including whiteline Sways+ end links and Swift lowering springs plus Voltex Type 4 1800mm wing all to address downforce and handling on curves rollong on F 19X9.5 265s +17 / R19X11 305s+10. My dyno tune was with a E60 due to mix of pump 93 and E85 not full tank of E85. I noticed after filling tank completely E85 the acceleration is intense.

 

[Bumflik]

Pix

 

[DiZZ1]

Great builds both cars ! I can only imagine what 500 to the rear of this small car feels like!

 

[tokie]

Very nice @Bumflik

@DiZZ1 Still stock tires tires but will eventually get new and different tires.

 

[Bumflik]

Great builds both cars ! I can only

Very nice @Bumflik

@DiZZ1 Still stock tires tires but will eventually get new and different tires.

Thanks bud and I absolutely love your build. I can tell you thought this out and strategically planned!

 

[tokie]

Thanks.

By chance, do you have more pics of the wing? I am curious about the mounting. Just drilled?

 

[Bumflik]

Drilled in hatch. Yep. Pure Customs in Feasterville Pa tackled the project. I purchased the Wing from Bulletproof in Cali.

 

[Bumflik]

More

 

[Bumflik]

Gonna put this in my tank

 

[tokie]

Spicy

 

[donberg]

What was the final cost of your build?

 

[tokie]

I am not sure of the exact amount, but it was expensive to get to this point. For sure, it was over $15k.

Not exactly sure how much I saved but doing some of the install myself (i.g., exhaust, downpipe, all suspension, etc.), but still expensive.





I def could have saved a significant amount if I opted to stay away from full E85. It is marginal gains for a huge increase in cost (I would not have needed to get HPFP, sensor, injectors, flexfuel can, etc.), but I didn't want to mix at the pump as I am lazy to drive to the next pump over. And I'll still need to occasionally do pump gas anyway to help clean and maintain.

But overall, I am happy with the build. Expensive, but no regrets.