Yeah. A lot of people just run blanks or slotted at all the HPDEs I go to. Quite a few run the cheapest shit they can find and say they have been happy with that. If you are tracking, the rotors, pads, fluid, tries, etc... are consumables that disappear very very fast. I've ran through 250$ pads...
That's not a bad Idea. I might try a 110 for the diff the next time I do a change.
I will say, DO NOT RUN STOCK DIFF FLUIDS FOR LONG. That shit came out BLACK at 5k miles. I bet the breakin additives they have are just brutal on the diff gears.
Just FYI, modern common knowledge for track driving is to not run drilled rotors due to the tendency of them cracking at the holes like so:
It's best just to get vented rotors, slotted if you so desire.
I wonder if you can ask z1 to add in this spacer from the get go. If it’s reduces nvh by 90% and retains 90% stiffness then it should be an option directly from them. Seems like an overall good idea.
I’ve already chewed through the stock pads at 14k miles. I’ve got on the “premium” grade stuff off rock auto or 30$ per axle.
I can come to a complete stop at 156mph just fine.
Unless you are truly track driving or doing a hardish canyon run, just put the cheapest crap on there.
if you are...
Could you take some pictures of the pipe routing to the intercooler around the sides of the heat exchangers. I just recently did brake ducting and am worried about this mod interfering with the brake ducting.
https://www.z1motorsports.com/nismo/nismo/nismo-2023-nissan-cold-air-intake-p-41460.html
I was offered a used version of this (I don't know the price yet), but I for sure do not want it if it requires tuning the car. I like what Nissan has done with the power plant, so if there isn't any other...
Yes, but I'd rather have the thicker fluid as I assume the 90 weight spec is designed for city driving, not track driving. Additionally, it's a 75 weight cold, similar to Nissan's spec.
350F is not the flash point for oil, so no worries yet. If necessary, I could look into this...
I track mine and use a 75w140 by redline. I’ve done oil analysis and it’s fine. The only thing I’m really losing is gas mileage but worth the extra weight when the diff regularly hits 350f out there on track.
So I just did the swap. Not too hard, but I might be retarded. I was roughing up the exhaust a little too much trying to get it off and fucked the threads on one of the studs. Had to beat it off and replace it with one of the studs that are on the AT exhaust.
I got the full AT exhaust setup...
Kind of a nerdy question, but anyone know the torque ratings for the bolts that attach the flanges between the muffler and the midpipe, and the midpipe to the Y pipe?
Of course if no one knows, then I'll just eye ball it as it's prolly not serious as long as there isn't a leak.
As a side...