Sponsored

Search results

  1. CHONK!

    Found a vendor in EBay that has a similar product. It is a wrinkle black shift knob that weights 600grams. Most importantly it fits flush with the shift boot without the stock collar. The overall height is greatly reduced. I went for a drive and it felt great! To me it completely transformed...
  2. Lowering springs question

    For whatever reason I ended up with almost 1”drop on all 4 corners. Which is fine as I didn’t want any lower. Street car only.
  3. Lowering springs question

    I replaced the stock swaybars with a set of Eibach sways. Otherwise no other suspension mods.
  4. Lowering springs question

    This are the specs after the RSR lowering springs. I have 15mm / 20mm F/R wheel spacers. My final ride height is 27.25" on all 4 corners.
  5. 27 manual shift knob replacement?

    Not at all. I just put it in neutral.
  6. 27 manual shift knob replacement?

    I was thinking of replacing the stock shift knob for a while now. I was very hesitant as the horror stories I heard on the difficulty level of removing the stock knob. I saw a video of this person who removed the stock shift knob with ease. He used a fairly heavy duty strap wrench. I looked...
  7. Pop-up hood (popper delete kit) installed with pics

    All done! Put everything back together. I just zip tied the connectors to the closest anchor points. Put some silicon around the connectors. I ordered the round cover blanks from Amazon to cover the openings. Started the car and no unwanted dash lights. Another successful project. Thank...
  8. Pop-up hood (popper delete kit) installed with pics

    The struggle with the bottom nut in the hood popper is real! I almost gave up and was going to just leave the hood popper in place. My last ditch of effort was to remove the battery. That allowed a bit more access to the bottom bolt. I ended up with a straight 12mm wrench went in parallel to...
  9. Pop-up hood (popper delete kit) installed with pics

    I just ordered some 2.2ohm , 1/2 watt resistors. I will be using them to the stock harnesses. I think the price tag on the commercially available product is a bit steep for what it is. My understanding is simply connecting the two ends of the resistor to the stock plug. Will report back...
  10. Alignment after RSR Springs

    You are correct. I actually found this issue out myself. My front wheels were stuck to the hub after I installed the bolt with the 15mm spacers. The stock studs were a tad longer for the 15mm spacers. What happened was I was compressing the studs slightly into the back of the wheels. I had...
  11. Alignment after RSR Springs

    I will try to take some photos today. I just used some generic spacers. I have used generic spacers on many cars and had absolutely no issues at all. Most of the so called "brand name" spacers are all manufactured in China anyway.
  12. Alignment after RSR Springs

    I am very pleased with the way the RSR springs made the car looked as well as the improved performance. Keep in mind I have 15mm/20mm spacers F/B. Today I had an alignment done. The technician was the same person who did my Miata a while back. He was very engaging with me throughout the whole...
  13. Oil Pressure Solenoid

    I recently did. Was good for one day. Threw a check engine light and the code was the oil solenoid malfunction. I ended up just put a rubber hose with a cap over the stock solenoid and zip tied to the bracket. So far so good. The disappointing part was I email Jraccessories and never...
  14. JR oil solenoid block off plate

    Spoke too soon. Got a check engine light today. It was the oil solenoid code. I used the JR supplied dummy plug to put into the stock harness. Apparently it did not work. I ended up putting the oem solenoid into the stock harness and just zip tied it on to a nearby bracket. Will call JR...
  15. JR oil solenoid block off plate

    I probably will switch to a 5w-30 oil on my next oil change
  16. JR oil solenoid block off plate

    Thanks. I am still using 0w20. That may explain why my idle oil pressure is around 18-23 at idle when my car is fully warmed up.
  17. JR oil solenoid block off plate

    Installed that today. For those who have this mod what oil pressure are you seeing at idle once the car is warm ?
  18. Lowering springs question

    I finally had a change to install the RSR lowering springs. I thought I would start with the rear as it seemed very straight forward. I was wrong. I had a very difficult time lining up the bolt for the spring bucket. I ended up having to remove a few trail arm bolts to loosen up the...
  19. Aluminum Oil Pans (Z1 vs. CZP)

    Perfect timing. I just did my first oil change at 1K miles. While I was at it I changed out the ABS oil pan with a Dorman oil pan and also replaced the oil solenoid with a JR oil solenoid block off plate. Pretty easy to remove and install. It also comes with a dummy plug for the stock...



Top