has anyone pulled the coilovers off the car to actually look at them
is this “local mechanic” someone versed in aftermarket suspension specifically coilovers?
i would go to a true suspension shop that works on this stuff and not a general mechanic
You want Ohlins with a Stanceparts front aircup setup or the Sakebomb spec Ohlins with their air cup system
matched rate/damping to your desire, and no worries about bumps and ramps
and then the SPL arms to set your alignment to whatever you want
and then wheels to complete the stance
Are you sure it's a "clunk" and not a metal screech or pop?
Assuming it's not something as dumb as nuts and bolts not being torqued down properly, the most common cause of coilover noise is the springs rotating under compression and grinding against the perch/mounts. This is not a Z problem...
I am not a GTR expert but a cursory search indicates Nissan gave it limited camber adjustment in front via eccentric bolts. Like the rear, it's maybe a degree of adjustment, so you need aftermarket arms to do any real changes
Still, better than nothing.
Because Nissan cheaped out
same lack of feature since the Z33, so its been almost 20 years that they failed to account for this
add to that an incredibly conservative alignment and it's no wonder all the Z platforms are understeering pigs out of the factory
You should always replace the arms because there is no factory adjustment and you want to be able to set your alignment spects
100x more important when you get new wheels
I use an Antigravity 51R (24amp), which weighs 11 lbs.
An Optima yellowtop is 36.4 lbs
Not sure where else you could find 25 lbs of weight savings for a few hundred bucks.
My concern is the battery here such a small size.
the 51R i use is just below GTR size, and i have a 370z.
no problems so...
It's not gate keeping when you come asking a nonsensical question.
Nothing stopping you from meeting the people you're asking for help in the middle..
Spend 30 minutes and read how wheel sizing works,
Here, your ignorance is a choice.
Right now we aren't even speaking the same language
where are you putting the tank?
top of the trunk floor is simplest
you can also ditch the spare and mount in that well
you can also partially sink it in (custom work needed to cut out floorboard)
If what you're buying is these
https://www.apexi-usa.com/products/apexi-exv-front-upper-camber-kit-pillow-ball-nissan-370z-g37-m35-04-10?variant=44348477964509
You are being scammed, since those are rebranded china made arms that everyone else sells
Case in point, they are the same as Megan...
The lip of the inner fenders can be
The nismo flares cant
Its a bunch of clip things that reduces clearance
thats why they’re useess and i tell people to punt them immediately
i understand, but i was curious if they were doing the same for Nismos
for the Z34/Z33, i believe it was relatively easy to get. Z1 stocked them regularly
A "Nismo conversion" will never be cost efficient because the premium Nissan puts on the parts
However, you can spend equal or less money to do better, just without the Nismo logo.
For example the Nismo "recaros" are not real Recaros, they use the nismo back but a nissan bottom.
A real Recaro...