Sponsored

Search results

  1. GUN METALLIC Nissan Z Color Pics & Club

    Thanks! Work ZR10 F: 19x9.5 +23 R: 19x10.5 +15 Yokohama Advan V107 F: 265x40 R: 295x35
  2. GUN METALLIC Nissan Z Color Pics & Club

    Got some meatier tyres on and snapped a nice sunrise shot. Not bad for a phone camera and no filter!
  3. Sticky Steering Wheel, Cleaning Tips

    My detailer recommends using a damp true sheepskin leather chamois on all the interior surfaces, with no sprays or treatments.. I've done this on all my cars for a while now and they all look fresh as.
  4. GUN METALLIC Nissan Z Color Pics & Club

    Congrats! Gun metallic looks so good with a proper camera and a bit of editing to bring out the liquid metal shine
  5. Kludos' Gunmetal Z Build

    Today I locked horns with the full MAPerformance downpipe installation, and came away victorious. I was expecting this to be bad, and it was... but it wasn't impossible even on the garage floor. A few tips if you attempt this yourself: 1. A lift would make life easier. 2. Spray your nuts - even...
  6. Downpipes & Best Practices

    I'll be wrapping mine. I can already feel the heat through the firewall on longer runs with the stock DPs, let alone once I get a tune on it. It should not inhibit installation since there is decent access with the aftermarket pipes.
  7. Downpipes & Best Practices

    Anyone with the MAPerformance full downpipes, was your RH O2 sensor wire long enough? The instructions say you just need to unclip the harness from it's mount, but mine is still too short :confused: Edit: I just needed to gently pull on the wiring harness and I got them connected.
  8. Kludos' Gunmetal Z Build

    I couldn’t find the tyres I wanted in the right size, so I stretched the stock tyres around the ZR10s so I could get them on. The rears are too stretched for my liking, but I really love the wheels, and I’m surprised the fitment is so good - I thought I’d need spacers for sure. I might still...
  9. Pics & Vids of Nissan Z with aftermarket wheels

    Looks great, the rears look flusher than I'd expect for +23. What is your rear setup like?
  10. Pics & Vids of Nissan Z with aftermarket wheels

    Just another Z with Work ZR10s. Running stock tyres for now and the rears are stretched AF. Front: 19x9.5 +23 Rear: 19x10.5 +15
  11. Kludos' Gunmetal Z Build

    Had some more goodies arrive. First up was the mishimoto catch can. I was worried about this install after doing the intakes, but it was super straightforward. The only hiccup was getting the intercooler back on - the video showed them attaching it to the manifold first then the throttle body...
  12. Alignment after Lowering Springs - Camber Help

    So with stock parts I could get 1.6 deg camber and pretty little toe with an inch of drop in the rear. I've now done adjustable toe and camber arms and I'm at 0.9 comber with 2mm toe and the car has so much more grip. It's night and day better for spirited mountain pass driving. The front...
  13. Kludos' Gunmetal Z Build

    I just received the front pipe to go with the exhaust. Most brands seem to sell these together, but Fujitsubo offer them separately, and I spent some time waiting for it to arrive. It's a nice upgrade over the tiny stock part and has changed the note of the whole system to be lower and a little...
  14. TailGate Rattling

    FYI there's a follow up to the video posted above, he finds it in the actuator motor/gearing for the rear latch. I've taken mine out and added some grease, but the noise was too minor to be the problem.
  15. TailGate Rattling

    OK, this looks like today's project then! I've done the popper trick and that helped with some noise and also the hatch release, but since going to firmer suspension I have this annoying rattle on rough surfaces. Will report back with how I go. UPDATE: I pulled all the trim out and the noise...
  16. Kludos' Gunmetal Z Build

    Yeah, we love our laws down under. Need a permit to wipe your ass it feels like sometimes. I'm not sure about this one - I'm keen to heard what other people are doing. It's extremely stiff already so I'm worried I might be taking away grip by making it sit any flatter, but maybe a softer...
  17. Kludos' Gunmetal Z Build

    Phase 3: Tune and wheels (in progress) I'm in a bit of a holding pattern now while I wait for parts and also let the wallet recover from the unplanned spend on a few items. I have some MAPerformance catted downpipes ready to go in - they were a good price so I grabbed some while they were in...
  18. Kludos' Gunmetal Z Build

    Phase 2: grip and stance For coilovers I went with HKS Hipermax R. They are super stiff and have introduced some noise, but they are great for ripping my local backroads. To complete the look while I save/wait for wheels I added some Z1 lowered spacers. With the stock suspension arms I could...
  19. Kludos' Gunmetal Z Build

    Phase 1: noise and other immediate needs There were a few things that I wanted to do immediately. First the ugly front plinth needed to go, replaced with a flow brackets plinth delete kit and JDM vanity plates. Next was the ceramic coating to protect the paint, g-techniq all the way (also the...
  20. Kludos' Gunmetal Z Build

    Thought I might start one of these threads. As a bit of background, I've never done up a car so I'm a noob with a lot of this stuff, but I have wrenched a lot on mountain bikes so some of that is transferrable. So far I've done all the work myself (checked by a professional) and it's been great...



Top