Sponsored

Search results

  1. Does the AT exhaust setup fit the MT version of the car?

    I had the exact same problem with just the AT axleback, once I added the resonated mid pipes it sounded like a lot throatier version of the MT exhaust. Maybe 20% louder, noticeable but not harsh on the ears.
  2. Does the AT exhaust setup fit the MT version of the car?

    I have a 2024 performance and I have the AT catback on mine and it sounds about perfect for what I want! I started with just the axle back and didn’t care for the drone cruising and volume as it’s pretty much straight pipes with how the rear resonator is set up. Once I added the mid section it...
  3. Advice for replacing stock tires on 2024 Performance

    Totally! Everyone has a different use case! Mine is a fun around town with a few trips car, not track. It isn’t my daily but I don’t want to put it away from Thanksgiving to March either. It is sticker tires, probably a second fuel pump and/or fuel tank baffle and pads, rotors and fluid away...
  4. Advice for replacing stock tires on 2024 Performance

    I’d suggest to go with the Continental Extreme Contact DWS 06 over those Michelinā€˜s. Both are great choices for a high performance all season tire but the Continentals tend to have less tire noise and you’ll save a chunk over the Michelin’s. I got rid of the 007s this winter and run the...
  5. Custom Steering Wheel

    It’s close enough so definitely will, at first it was off a lot! When I did a custom wheel on my old GR86 from Rexspeed it was perfect out of the box so I had similar expectations since this wheel was about $300 more than that one.
  6. What did you do with your Z today? šŸ™‹šŸ»‍ā™‚ļø

    I was thinking the exact same thing!
  7. Custom Steering Wheel

    I got it installed! The material feels great but it’s a little half baked in design still as mine is a little thicker than stock (which I wanted) but they didn’t account for where the trim pieces sit on the wheel and it gives a gap between the front and back. It’s really only noticeable if...
  8. What did you do with your Z today? šŸ™‹šŸ»‍ā™‚ļø

    So I’ve been busy with the Z the last couple of weeks! I got a new steering wheel, which looks and feels great but had some issues that almost resulted in it being returned but my local custom shop, GP Customs, gets all the credit as they fixed enough of the issues from the manufacturer to make...
  9. What did you do with your Z today? šŸ™‹šŸ»‍ā™‚ļø

    To quote Mighty Car Mods, In the Bin!
  10. What did you do with your Z today? šŸ™‹šŸ»‍ā™‚ļø

    I think those are more designed to replace OE steel parts to save weight. I bet it might make the chassis slightly stiffer but nominal. But give it a shot and report back!
  11. Looking for experienced input on purchase of new Z (Performance v NISMO)

    Yes and no, the performance trim is more the luxury trim with leather, power and heated seats, bigger infotainment screen, plus the LSD, better brakes and better wheels versus the Sport. The NISMO gets partial Recaro seats but loses the heating elements and power. Then bigger rotors, better...
  12. What did you do with your Z today? šŸ™‹šŸ»‍ā™‚ļø

    Nice! I already have the NISMO coilovers and stabilizer bars. I’m really excited to see how it feels after the braces…!
  13. What did you do with your Z today? šŸ™‹šŸ»‍ā™‚ļø

    Nice power bump! I’m pretty happy with the stock power level, my focus is more on chasis and suspension. I’m getting the subframe braces from Z1 next week.
  14. Non owner Z impressions

    Maybe that’s part of the reason I moved on to the Z is my daily is a IS350 which is a much nicer and quieter interior than the GR.
  15. Instrument cluster top hat removal

    Found it! Fast forward to 5:50, seems super easy!
  16. Instrument cluster top hat removal

    I also know axis Japan makes a Alcantara replacement so can’t be too hard!
  17. Instrument cluster top hat removal

    If someone has done this please share! I’m guessing its just some plastic clips as I don’t see any screws.
  18. Custom Steering Wheel

    An hour of labor, so $125



Top