yeah it's been mentioned a few times
at above stock power levels, with 100TW tires
you need 2.5 inch ducting or better, plus 2 piece rotors (the good kind, like Paragon or Racing Brake)
or even consider swapping the stock system for something more dedicated from AP Racing
before you throw money away that you don't even have yet, i strongly suggest you read through some threads on the wheel/suspension forums and other places
Wheel fitment involves many factors
the same wheels in bad spec will look like crap
The RZ34 platform can fit massive wheels - with...
There is 100% something wonky going on with how spring rates are being translated
I have Aragostas, a JDM company (worked with AST)
Look at their chart (from their website directly).
I have Type-S, 14/10's for my Z34
All of their RZ34 options are in the same ballpark, and more importantly, are...
While they have JDM appeal, I'm not sure you're coming out ahead when compared to just getting some Paragon rotors for $900 (maybe less if you catch a sale), and you'll have domestic support in the US)
and if you want a complete caliper/rotor set for track . . . AP Racing is more accessible...
There are a variety of fixes at different price points. You'll need to pick the one that suits your needs
At the bottom is the Z1 Anti-Starve kit, which is basically just a Hydramat and an auxiliary pump, plus some wiring. You can source the parts individually as well, and probably beat their...
Am i missing something? Preload should be zero - perch collar rotated against the bottom of the spring and then locked.
Height is independently adjustable from preload, eyeball it to the factory strut to start and adjust from there, get it on the car, adjust to desired spec.
Since this is...
The purpose of thrust washers/sheets is to allow the spring to rotate more freely.
Because it is metal on metal, sometimes springs can catch., resulting in a screeching or squeaking noise. Theoretically, if it is a poorly made setup, it can cause binding and stress, although i've never heard...
No way for us to tell if there's frame damage without bein there to test stuff
but there is definitely something wrong with the current setup - too much difference right/left.
Since fronts are fixed, i imagine there is something bent
All of this can indeed be "fixed" by adjustable arms, if it...
you can put it inside the storage compartment if you want it to be less visible
as anedoctally, my local stance dealer/installer says tankless is slow AF (this was when we were looking at options to move my tank)
yes, you'll have to account for the thickness of the cup by lowering the height accordingly
you can just get it in the ballpark, you're gonna need an alignment afterwards anyways and the suspension shop can do it more precisely