380-395 wtq is the range for all the ones I've seen. The Z1 manual was 393whp/391 wtq. I wish the auto Z's had the CF driveshaft because that might be the biggest reason why the manual has slightly better drivetrain losses.
It’s custom made. There’s a guy name Brian(KSI) on Etsy that makes custom parts for our cars. He himself has a Nismo Z. He can make custom emblems and other things.
So great news today fellas! I setup an appointment with Z1 to have them dyno my Nismo with B6A intakes, CZP HX and Stillen Comp exhaust using the Stillen Tru Control. I will be able to do 3 runs for $180 and since I know what a Nismo does on Z1’s dyno Im not going to do a off mode dyno run for...
I took out my less than 1 month old center caps and replaced them with a floating style that looks very similar to the last set. I had to get Bryan to custom make these for the Apex VS5RS and even though the measurements were on the money I had to still sand some areas on the floating center...
I think I've seen someone say the Sport wheels are around 30-32lbs a wheel!!! The Performance model is around 24/25 lbs and the Nismo is 23.5/24lbs in my testing.
If you want a lightweight 19 then Apex VS5RS is 19.5/20.5lbs. They also make a lightweight 18 inch variant that is another 1 lb per...
I finally got rid of the original Dunlops. I wanted to try a lower grip longer lasting tire in the General G Max RS.
The unsprung rotational mass of these tires, my 2 piece rotors and the Apex VS5RS is insane!!!
Dunlop 255-40/285-35 19’s = 130 lbs
G Max 265-35/285-35 19’s = 102.8 lbs
Nismo...
It's a 2024 Z Nismo. No issues with rubbing on the stock wheels when I had them on but these are Apex VS5RS with a more aggressive offset than the stock wheels so they will rub but I had to make some adjustments to the clips from the Nismo wide body itself by removing them, however these issues...
I think if you're going to run LDP's without a tune and have no desire to later go big turbo it should be the 2.5 inch type LDP's as those are not a huge difference over stock like a 3 inch. I would think a 3 inch LDP+exhaust has a higher chance of over-boost issues
On a 2024 Nismo Z yes.
I think the shocks/springs are slightly more softer/forgiving on the 2027 Nismo Z models
I went with the Pro Kit 1.2/1.2 drop
I have a feeling the springs will work on the 2027 models but it hasn’t been tested yet so you may want to make sure of that first.
Thanks for...
What is your TruControl set to map wise? I think Map 7 might be dangerous with your exhaust mods(large sums of overboost) hence why I utilize Map 3/4 with my B6A intakes and Stillen Competition exhaust,
My custom airbag cover that took 5 weeks to make came in although I am kind of pissed they didn’t just keep the Z red and the background black like I requested.
To be fair the C7 Z06 mops the floor with the M2/M2CS/Mustang DH/Cayman GT4/Nissan GTR, pretty much cars that is much more money than the Z Nismo. Corvettes have always been the biggest bang for buck sports cars.