Before I decided to stay OEM+, I had made my mind up on the RPF1 in a non-rotatable square fitment. If you combine an RPF1 front with an RPF1RS rear, you can get some interesting combinations. Everything from mild to aggressive, 9.5", 10", or 10.5".
A twisting motion helped me "break the seal" of the hose, then it was a little easier to pull it out a mm at a time. It might help to hit a Q-Tip with some WD-40 and then rub a small amount around the edge where the hose meets the pipe, try to work it in. Then continue the twisting back and...
I feel like some people might be conflating “tiny performance hit” with “catastrophic engine failure”. No one is saying your engine is going to blow up if you don’t get a catch can.
Every single product of engineering is an amalgamation of compromises. When we mod our cars, it’s because our goals do not align with the quality, performance, comfort, or regulatory compromises the engineers were forced to make. In the case of your TruControl, you are more interested in cheap...
Dipped the Nismo LM-RS6 wheels. Black is boring!
Before, about to clean and prep:
Protecting my baby:
After the four tack coats:
After the wet coats:
The satisfying part:
Tires fully wiped down:
Results:
PSA to anyone considering the heritage fascia:
Since the heritage fascia now shows up on the Nissan parts site and you can select it as an option in the configurator, I figured it was available to purchase and placed an order. After a bunch of back and forth with the dealer, I got the following...
This is 10.5” +15 in the front. Way too much poke, IMO. Proper 10.5” fitment for the front is closer to +30-35, but not sure about inner clearance. And not a lot of options in that offset range without going custom offset. I think most manufacturers assume 10.5” wheels are destined for the rear...
Looks like good work. What shop did you use? I’m in Murfreesboro. I was thinking about getting the interior accents done in Recaro confetti or HKS monotone oil slick to match the vintage JDM aesthetic.
There’s a little round “nub” that sticks down on the front subframe. However, my low profile jack couldn’t reach it, so I picked up the Cusco jack assist ramps. Can reach it no problem with the ramps.
Z1 sent me the F0E. I even double checked it was the right filter, but didn’t read beyond the first page of the “OEM Oil Filter part number?”thread. 🙄
The mentioned CZP panel looks the nicest of the available options and was gonna be my pick at first, but I didn’t like the style of the oil...
Did the first oil change at 1,672 miles. Been keeping it under 4,000 RPM for the break in, so revving it out for the first time since I brought her home in March was fun!
Went ahead and installed a Fumoto valve and the Z1 undershroud while I was down there, and then took a glamour shot since I...
Agreed. The whole point of my first post was to warn that if OP is actually concerned about “performance”, then maybe the deceptively named Performance trim isn’t the best option. It’s well documented that the Performance is still a floaty, rolling mess when pushed. The $10k cheaper Sport makes...
This is the post you see from someone having a hard time coping with the fact that a Sport Z with $5k in suspension, brakes, and tires will absolutely walk a “Performance” Z, open diff and all. 🤷🏻♂️
Sounds like OP has already made up their mind, but another thing to consider is that the spoilerless decklid looks soooooooo much better. 😆 I fully realize it is silly, but this was near the top of the list of my considerations when I was debating Sport vs. Performance. The spoiler ruins the...
If you truly care about “performance”, the Performance trim will not satisfy. And if you’re gonna end up swapping the suspension, brakes, wheels , etc. anyways, I see no reason to pay the extra $10k. Unless you just really love Bose and leather!
The Performance trim just never made sense to me...