Sponsored

Search results

  1. High Oil Pressure After Removing Oil Solenoid – Best Oil Filter?

    Mine didn’t through a hard code but it did give a soft code that was only visible on a scanner. But I got tuned by sonictuned not long after.

  2. AP Racing Big Brake Kit BBK installed on 2023 Nissan Z by SOHO Motorsports

    Anyone know if the Cp9668 will fit under the stock 19” rays ??

  3. High Oil Pressure After Removing Oil Solenoid – Best Oil Filter?

    He makes everything himself, I've had mine installed and my idle sits around 175kpa now, I'm using a GTR filter. Credit where credit is due… it is a solid bit of billet. I got my mechanic to install it. He said it was straight forward. I got a tune just after had the soft code tuned out.

  4. High Oil Pressure After Removing Oil Solenoid – Best Oil Filter?

    Prideauto does a block off plate, https://prideautollc.com/products/vr30-oil-block-off-plate It was $95 a few months back.

  5. High Oil Pressure After Removing Oil Solenoid – Best Oil Filter?

    Jack stands will do, just tight to get into. Hoist would be much easier. You will get a soft code that will need to be tuned out.

  6. High Oil Pressure After Removing Oil Solenoid – Best Oil Filter?

    https://www.sonictuned.com/post/vr30-engine-failures-without-warning It's better to have the delete done, few articles around.. More preventive maintenance

  7. Finally put the Voltex Type 4 Wing on the RZ34. VOLTRON Force ! UNITE!

    Awesome! Are those custom fittings or is that was provided?

  8. My 2023 Nissan Z Build – Engine, Suspension, Aero and Wheels/Tires Mod

    What size wing did you go with 1515mm or the 1800mm? It looks so good!

  9. High Oil Pressure After Removing Oil Solenoid – Best Oil Filter?

    I think the GTR filter is a the way to go especially if tuned and tracking. But that's just my 5 cents. I was very happy with the T&P’s after a heavy track session running a 5w40.

  10. Finally put the Voltex Type 4 Wing on the RZ34. VOLTRON Force ! UNITE!

    Thanks mate

  11. Finally put the Voltex Type 4 Wing on the RZ34. VOLTRON Force ! UNITE!

  12. Finally put the Voltex Type 4 Wing on the RZ34. VOLTRON Force ! UNITE!

    Legend thanks mate, I'm looking at getting the same wing but wanting to go with side mounts

  13. Finally put the Voltex Type 4 Wing on the RZ34. VOLTRON Force ! UNITE!

    Have you got any photos from inside the trunk and mounting plates? I’m curious to see how much space there is underneath and how its support? Cheers

  14. High Oil Pressure After Removing Oil Solenoid – Best Oil Filter?

    https://rycofilters.com.au/part/z547st I'm running 5w40

  15. High Oil Pressure After Removing Oil Solenoid – Best Oil Filter?

    I ended up just using a GTR filter, zero issues!

  16. High Oil Pressure After Removing Oil Solenoid – Best Oil Filter?

    That’s correct, my idle sits around 175 kpa no, just a tight squeeze to get in on the left side of the engine. My mechanic did it on a hoist.

  17. High Oil Pressure After Removing Oil Solenoid – Best Oil Filter?

    375kpa (54psi)

  18. High Oil Pressure After Removing Oil Solenoid – Best Oil Filter?

    Hi all, I’ve removed the oil pressure solenoid on my 2023 Nissan Z and installed a block-off plate, so the engine now runs in high-pressure mode at all times. Idle pressure sits around 175 kPa (~25 psi). I’m concerned about whether the OEM oil filter is suitable for this setup, especially...

  19. Cooling overhaul project

    Z1 have a conversation kit but you do need to respray it.

  20. Cooling overhaul project

    I have to say it looks sexy



Top